Nissan 350Z 3.5 V6 313 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Nissan 350Z 3.5 V6 313 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Nissan 350Z 3.5 V6 313 hp ECU
Nissan 350Z (2003) 3.5 V6 313 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1933). Stage 1 chip tuning raises power from 313 to 335 hp (+22 hp, +7%) and torque from 353 to 375 Nm (+22 Nm). ECU — Hitachi BEDxxx/MECxxx. Flashing method: OBD or Bench depending on the unit's protection. The 2003 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Nissan is a Japanese carmaker from Yokohama, founded in 1933. Nissan is part of the Renault-Nissan-Mitsubishi Alliance. Infiniti is Nissan's premium sub-brand for North America and the Middle East. Nissan's petrol range covers mainstream turbocharged and naturally aspirated engines. High-output Nissan models deliver a solid gain with Stage 1. Nismo is Nissan's performance division, the equivalent of AMG/M.
The Nissan community in the JDM segment is the world's largest for the GT-R. The GT-R community is an industry of its own with ready-made Stage files. High-output Nissan models deliver a solid gain with Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Nissan 350Z 3.5 V6 313 hp?
After Stage 1 the power of the Nissan 350Z 3.5 V6 313 hp rises from 313 to 335 hp, a gain of 22 hp (+7%). Torque rises from 353 to 375 Nm (+22 Nm).
How does Stage 1 differ from stock on the Nissan 350Z?
Stage 1 is a software optimization of the factory ECU firmware of the Nissan 350Z with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +22 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Nissan 350Z?
The high-output Nissan 350Z 3.5 V6 313 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Nissan 350Z 3.5 V6 313 hp?
Stage 2 on the Nissan 350Z 3.5 V6 313 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Nissan 350Z 3.5 V6 313 hp use?
The Nissan 350Z 3.5 V6 313 hp is fitted with the Hitachi BEDxxx/MECxxx ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Nissan 350Z remain valid after Stage 1?
After remapping the Nissan 350Z, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Nissan 350Z?
Reading and writing via OBD takes 25-30 minutes on the Nissan 350Z. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Nissan 350Z?
Before Stage 1 the original of the Nissan 350Z 3.5 V6 313 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Nissan 350Z 3.5 V6 313 hp cost?
The remap price for the Nissan 350Z 3.5 V6 313 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.