New Holland T9 T9.670 608hp (447kW) 2848Nm — Stage 1 file (+39 hp)
hp
Stage 1 file for New Holland T9 T9.670 608hp (447kW) 2848Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T9 T9.670 608hp (447kW) 2848Nm ECU
New Holland T9 (I) T9.670 608hp (447kW) 2848Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 608 to 647 hp (+39 hp, +6%) and torque from 2848 to 3046 Nm (+198 Nm).
New Holland shares platforms and engines with Case within CNH (FPT engines). New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Топ агро-дизели — мощностной потолок сегмента.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ New Holland — мощностной потолок агросегмента.
Frequently asked questions
How many horsepower does the New Holland T9 T9.670 608hp (447kW) 2848Nm reach after a remap?
Stage 1 for the New Holland T9 T9.670 608hp (447kW) 2848Nm adds +39 hp — power increases from 608 to 647 hp (+6%). Torque rises from 2848 to 3046 Nm (+198 Nm).
What does a Stage 1 remap of the New Holland T9 T9.670 608hp (447kW) 2848Nm include?
Stage 1 on the New Holland T9 T9.670 608hp (447kW) 2848Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +39 hp with no hardware changes.
What does Stage 1 give on the top-spec New Holland T9 T9.670 608hp (447kW) 2848Nm?
On the top-spec New Holland T9 T9.670 608hp (447kW) 2848Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the New Holland T9 T9.670 608hp (447kW) 2848Nm?
Stage 2 for the New Holland T9 T9.670 608hp (447kW) 2848Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the New Holland T9?
Stage 1 on the New Holland T9 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the New Holland T9 T9.670 608hp (447kW) 2848Nm done?
The full remap cycle for the New Holland T9 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the New Holland T9?
The original New Holland T9 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the New Holland T9 T9.670 608hp (447kW) 2848Nm?
The cost of Stage 1 for the New Holland T9 T9.670 608hp (447kW) 2848Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.