New Holland T9 T9.505 457hp (336kW) 2136Nm — Stage 1 file (+40 hp)
hp
Stage 1 file for New Holland T9 T9.505 457hp (336kW) 2136Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T9 T9.505 457hp (336kW) 2136Nm ECU
New Holland T9 (I) T9.505 457hp (336kW) 2136Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 457 to 497 hp (+40 hp, +9%) and torque from 2136 to 2416 Nm (+280 Nm).
New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. New Holland shares platforms and engines with Case within CNH (FPT engines). Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Топ агро-дизели — мощностной потолок сегмента.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ New Holland — мощностной потолок агросегмента.
Frequently asked questions
How much horsepower does Stage 1 add for the New Holland T9 T9.505 457hp (336kW) 2136Nm?
Stage 1 chip tuning on the New Holland T9 T9.505 457hp (336kW) 2136Nm boosts engine output by 40 hp: from 457 to 497 hp. Torque rises from 2136 to 2416 Nm (+280 Nm).
What changes in the New Holland T9 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the New Holland T9 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Does Stage 1 make sense on the New Holland T9 T9.505 457hp (336kW) 2136Nm with this much power?
On the top-spec New Holland T9 T9.505 457hp (336kW) 2136Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the New Holland T9 T9.505 457hp (336kW) 2136Nm?
Stage 2 for the New Holland T9 T9.505 457hp (336kW) 2136Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the New Holland T9 remain valid after Stage 1?
After remapping the New Holland T9, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the New Holland T9?
Reading and writing via OBD takes 25-30 minutes on the New Holland T9. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the New Holland T9?
Before Stage 1 the original of the New Holland T9 T9.505 457hp (336kW) 2136Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the New Holland T9 T9.505 457hp (336kW) 2136Nm cost?
The remap price for the New Holland T9 T9.505 457hp (336kW) 2136Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.