New Holland T9 T9.450 405hp (298kW) 1899Nm — Stage 1 file (+45 hp)
hp
Stage 1 file for New Holland T9 T9.450 405hp (298kW) 1899Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T9 T9.450 405hp (298kW) 1899Nm ECU
New Holland T9 (I) T9.450 405hp (298kW) 1899Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 405 to 450 hp (+45 hp, +11%) and torque from 1899 to 2145 Nm (+246 Nm).
New Holland shares platforms and engines with Case within CNH (FPT engines). New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Топ агро-дизели — мощностной потолок сегмента.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ New Holland — мощностной потолок агросегмента.
Frequently asked questions
How much horsepower does Stage 1 add for the New Holland T9 T9.450 405hp (298kW) 1899Nm?
The Stage 1 gain for the New Holland T9 T9.450 405hp (298kW) 1899Nm is 45 hp (+11%) over the stock 405 hp, for a total of 450 hp. Torque rises from 1899 to 2145 Nm (+246 Nm).
What is Stage 1 chip tuning for the New Holland T9?
Stage 1 on the New Holland T9 T9.450 405hp (298kW) 1899Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +45 hp with no hardware changes.
What does Stage 1 give on the top-spec New Holland T9 T9.450 405hp (298kW) 1899Nm?
Stage 1 for the New Holland T9 T9.450 405hp (298kW) 1899Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the New Holland T9 T9.450 405hp (298kW) 1899Nm?
Stage 2 on the New Holland T9 T9.450 405hp (298kW) 1899Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the New Holland T9?
Stage 1 on the New Holland T9 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the New Holland T9 T9.450 405hp (298kW) 1899Nm done?
The full remap cycle for the New Holland T9 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the New Holland T9?
The original New Holland T9 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the New Holland T9 T9.450 405hp (298kW) 1899Nm?
The cost of Stage 1 for the New Holland T9 T9.450 405hp (298kW) 1899Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.