New Holland T8000 T8050 325hp (239kW) 1450Nm — Stage 1 file (+41 hp)
hp
Stage 1 file for New Holland T8000 T8050 325hp (239kW) 1450Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T8000 T8050 325hp (239kW) 1450Nm ECU
New Holland T8000 (I) T8050 325hp (239kW) 1450Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 325 to 366 hp (+41 hp, +13%) and torque from 1450 to 1615 Nm (+165 Nm).
New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. New Holland shares platforms and engines with Case within CNH (FPT engines). Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные New Holland — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the New Holland T8000 T8050 325hp (239kW) 1450Nm?
After Stage 1 the power of the New Holland T8000 T8050 325hp (239kW) 1450Nm rises from 325 to 366 hp, a gain of 41 hp (+13%). Torque rises from 1450 to 1615 Nm (+165 Nm).
How does Stage 1 differ from stock on the New Holland T8000?
Stage 1 is a software optimization of the factory ECU firmware of the New Holland T8000 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +41 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the New Holland T8000?
The high-output New Holland T8000 T8050 325hp (239kW) 1450Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the New Holland T8000 T8050 325hp (239kW) 1450Nm?
Stage 2 on the New Holland T8000 T8050 325hp (239kW) 1450Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the New Holland T8000 remain valid after Stage 1?
After remapping the New Holland T8000, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the New Holland T8000?
Reading and writing via OBD takes 25-30 minutes on the New Holland T8000. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the New Holland T8000?
Before Stage 1 the original of the New Holland T8000 T8050 325hp (239kW) 1450Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the New Holland T8000 T8050 325hp (239kW) 1450Nm cost?
The remap price for the New Holland T8000 T8050 325hp (239kW) 1450Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.