New Holland T8000 T8040 303hp (223kW) 1300Nm — Stage 1 file (+47 hp)
hp
Stage 1 file for New Holland T8000 T8040 303hp (223kW) 1300Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T8000 T8040 303hp (223kW) 1300Nm ECU
New Holland T8000 (I) T8040 303hp (223kW) 1300Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 303 to 350 hp (+47 hp, +16%) and torque from 1300 to 1396 Nm (+96 Nm).
New Holland shares platforms and engines with Case within CNH (FPT engines). New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные New Holland — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much does the power of the New Holland T8000 T8040 303hp (223kW) 1300Nm increase after Stage 1?
Stage 1 chip tuning on the New Holland T8000 T8040 303hp (223kW) 1300Nm boosts engine output by 47 hp: from 303 to 350 hp. Torque rises from 1300 to 1396 Nm (+96 Nm).
What changes in the New Holland T8000 ECU after Stage 1?
Stage 1 on the New Holland T8000 T8040 303hp (223kW) 1300Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +47 hp with no hardware changes.
What does Stage 1 give on the powerful New Holland T8000 T8040 303hp (223kW) 1300Nm?
Stage 1 on the powerful New Holland T8000 T8040 303hp (223kW) 1300Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the New Holland T8000 T8040 303hp (223kW) 1300Nm?
Stage 2 for the New Holland T8000 T8040 303hp (223kW) 1300Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the New Holland T8000?
Stage 1 on the New Holland T8000 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the New Holland T8000 T8040 303hp (223kW) 1300Nm done?
The full remap cycle for the New Holland T8000 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the New Holland T8000?
The original New Holland T8000 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the New Holland T8000 T8040 303hp (223kW) 1300Nm?
The cost of Stage 1 for the New Holland T8000 T8040 303hp (223kW) 1300Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.