New Holland T8000 T8030 273hp (201kW) 1285Nm — Stage 1 file (+63 hp)
hp
Stage 1 file for New Holland T8000 T8030 273hp (201kW) 1285Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T8000 T8030 273hp (201kW) 1285Nm ECU
New Holland T8000 (I) T8030 273hp (201kW) 1285Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 273 to 336 hp (+63 hp, +23%) and torque from 1285 to 1536 Nm (+251 Nm).
New Holland shares platforms and engines with Case within CNH (FPT engines). New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные New Holland — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the New Holland T8000 T8030 273hp (201kW) 1285Nm?
The Stage 1 gain for the New Holland T8000 T8030 273hp (201kW) 1285Nm is 63 hp (+23%) over the stock 273 hp, for a total of 336 hp. Torque rises from 1285 to 1536 Nm (+251 Nm).
What is Stage 1 chip tuning for the New Holland T8000?
Stage 1 on the New Holland T8000 T8030 273hp (201kW) 1285Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +63 hp with no hardware changes.
What does Stage 1 give on the powerful New Holland T8000 T8030 273hp (201kW) 1285Nm?
The high-output New Holland T8000 T8030 273hp (201kW) 1285Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How does Stage 2 differ from Stage 1 on the New Holland T8000 T8030 273hp (201kW) 1285Nm?
Stage 2 on the New Holland T8000 T8030 273hp (201kW) 1285Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the New Holland T8000?
Stage 1 on the New Holland T8000 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the New Holland T8000 T8030 273hp (201kW) 1285Nm done?
The full remap cycle for the New Holland T8000 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the New Holland T8000?
The original New Holland T8000 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the New Holland T8000 T8030 273hp (201kW) 1285Nm?
The cost of Stage 1 for the New Holland T8000 T8030 273hp (201kW) 1285Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.