New Holland T8000 T8020 248hp (182kW) 1162Nm — Stage 1 file (+57 hp)
hp
Stage 1 file for New Holland T8000 T8020 248hp (182kW) 1162Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T8000 T8020 248hp (182kW) 1162Nm ECU
New Holland T8000 (I) T8020 248hp (182kW) 1162Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 248 to 305 hp (+57 hp, +23%) and torque from 1162 to 1390 Nm (+228 Nm).
New Holland shares platforms and engines with Case within CNH (FPT engines). New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные New Holland — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the New Holland T8000 T8020 248hp (182kW) 1162Nm?
Stage 1 for the New Holland T8000 T8020 248hp (182kW) 1162Nm adds +57 hp — power increases from 248 to 305 hp (+23%). Torque rises from 1162 to 1390 Nm (+228 Nm).
What does a Stage 1 remap of the New Holland T8000 T8020 248hp (182kW) 1162Nm include?
Stage 1 on the New Holland T8000 T8020 248hp (182kW) 1162Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +57 hp with no hardware changes.
What does Stage 1 give on the powerful New Holland T8000 T8020 248hp (182kW) 1162Nm?
Stage 1 on the powerful New Holland T8000 T8020 248hp (182kW) 1162Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the New Holland T8000 T8020 248hp (182kW) 1162Nm?
Stage 2 for the New Holland T8000 T8020 248hp (182kW) 1162Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the New Holland T8000?
Stage 1 on the New Holland T8000 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the New Holland T8000 T8020 248hp (182kW) 1162Nm done?
The full remap cycle for the New Holland T8000 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the New Holland T8000?
The original New Holland T8000 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the New Holland T8000 T8020 248hp (182kW) 1162Nm?
The cost of Stage 1 for the New Holland T8000 T8020 248hp (182kW) 1162Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.