New Holland T8 T8.390 340hp (250kW) 1672Nm — Stage 1 file (+56 hp)
hp
Stage 1 file for New Holland T8 T8.390 340hp (250kW) 1672Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T8 T8.390 340hp (250kW) 1672Nm ECU
New Holland T8 (I) T8.390 340hp (250kW) 1672Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 340 to 396 hp (+56 hp, +16%) and torque from 1672 to 1866 Nm (+194 Nm).
New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. New Holland shares platforms and engines with Case within CNH (FPT engines). Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные New Holland — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the New Holland T8 T8.390 340hp (250kW) 1672Nm?
Stage 1 for the New Holland T8 T8.390 340hp (250kW) 1672Nm adds +56 hp — power increases from 340 to 396 hp (+16%). Torque rises from 1672 to 1866 Nm (+194 Nm).
What does a Stage 1 remap of the New Holland T8 T8.390 340hp (250kW) 1672Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the New Holland T8 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +56 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the New Holland T8?
Stage 1 on the powerful New Holland T8 T8.390 340hp (250kW) 1672Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the New Holland T8 T8.390 340hp (250kW) 1672Nm?
Stage 2 for the New Holland T8 T8.390 340hp (250kW) 1672Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the New Holland T8 remain valid after Stage 1?
After remapping the New Holland T8, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the New Holland T8?
Reading and writing via OBD takes 25-30 minutes on the New Holland T8. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the New Holland T8?
Before Stage 1 the original of the New Holland T8 T8.390 340hp (250kW) 1672Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the New Holland T8 T8.390 340hp (250kW) 1672Nm cost?
The remap price for the New Holland T8 T8.390 340hp (250kW) 1672Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.