New Holland T8 T8.300 257hp (189kW) 1267Nm — Stage 1 file (+49 hp)
hp
Stage 1 file for New Holland T8 T8.300 257hp (189kW) 1267Nm
Target +0 hp. Custom development for your engine.
Chip tuning for New Holland T8 T8.300 257hp (189kW) 1267Nm ECU
New Holland T8 (I) T8.300 257hp (189kW) 1267Nm — agricultural diesel engine of the agricultural segment of the CNH Industrial group (Италия / США, 1895). Stage 1 chip tuning raises power from 257 to 306 hp (+49 hp, +19%) and torque from 1267 to 1546 Nm (+279 Nm).
New Holland shares platforms and engines with Case within CNH (FPT engines). New Holland is an agricultural machinery manufacturer, founded in 1895. New Holland is part of CNH Industrial. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные New Holland — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the New Holland T8 T8.300 257hp (189kW) 1267Nm?
Stage 1 for the New Holland T8 T8.300 257hp (189kW) 1267Nm adds +49 hp — power increases from 257 to 306 hp (+19%). Torque rises from 1267 to 1546 Nm (+279 Nm).
What does a Stage 1 remap of the New Holland T8 T8.300 257hp (189kW) 1267Nm include?
Stage 1 on the New Holland T8 T8.300 257hp (189kW) 1267Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +49 hp with no hardware changes.
What does Stage 1 give on the powerful New Holland T8 T8.300 257hp (189kW) 1267Nm?
Stage 1 on the powerful New Holland T8 T8.300 257hp (189kW) 1267Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the New Holland T8 T8.300 257hp (189kW) 1267Nm?
Stage 2 for the New Holland T8 T8.300 257hp (189kW) 1267Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the New Holland T8?
Stage 1 on the New Holland T8 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the New Holland T8 T8.300 257hp (189kW) 1267Nm done?
The full remap cycle for the New Holland T8 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the New Holland T8?
The original New Holland T8 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the New Holland T8 T8.300 257hp (189kW) 1267Nm?
The cost of Stage 1 for the New Holland T8 T8.300 257hp (189kW) 1267Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.