New Holland — Stage 1 / Stage 2 parameters database

The CHIPOK database holds 69 engines for New Holland with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 11 models — from early generations to current platforms. Diesel engines only.

Choose a model
Models11
Engines69
ECU makersBosch / Continental / Denso / Siemens
File turnaround30–60 min
or choose step by step
1
Choose a vehicle type

New Holland models in the database (11)

New Holland T6000
17 engines avg. +35 hp
→
T6010 101hp (74kW) 400Nm·T6020 112hp (82kW) 520Nm·T6030 RC PC 116hp (85kW) 543Nm·T6040 121hp (89kW) 563Nm·T6050 RC TP 125hp (92kW) 593Nm·T6060 132hp (97kW) 594Nm more 11
New Holland T7000
9 engines avg. +40 hp
→
T7030 167hp (123kW) 774Nm·T7040 182hp (134kW) 844Nm·T7050 197hp (134kW) 860Nm·T7060 214hp (157kW) 866Nm·T7510 141hp (104kW) 585Nm·T7520 151hp (111kW) 585Nm more 3
New Holland T6
7 engines avg. +28 hp
→
T6.120 110hp (81kW) 590Nm·T6.140 110hp (81kW) 590Nm·T6.150 121hp (89kW) 634Nm·T6.155 115hp (85kW) 632Nm·T6.160 130hp (96kW) 676Nm·T6.165 125hp (92kW) 682Nm more 1
New Holland T9
6 engines avg. +42 hp
→
T9.390 354hp (260kW) 1745Nm·T9.450 405hp (298kW) 1899Nm·T9.505 457hp (336kW) 2136Nm·T9.560 507hp (373kW) 2374Nm·T9.615 542hp (399kW) 2540Nm·T9.670 608hp (447kW) 2848Nm
New Holland TVT
6 engines avg. +38 hp
→
135 137hp (101kW) 570Nm·145 147hp (108kW) 610Nm·155 156hp (115kW) 660Nm·170 171hp (126kW) 725Nm·190 192hp (141kW) 790Nm·195 6.6 198hp (146kW) 792Nm
New Holland T5
5 engines avg. +21 hp
→
T5.105 106hp (78kW) 444Nm·T5.105 EC 106hp (78kW) 444Nm·T5.115 EC 115hp (85kW) 461Nm·T5.85 84hp (62kW) 444Nm·T5.95 98hp (72kW) 407Nm
New Holland T8
5 engines avg. +58 hp
→
T8.275 19(143kW) 4hp·T8.300 257hp (189kW) 1267Nm·T8.330 284hp (209kW) 1397Nm·T8.360 313hp (230kW) 1531Nm·T8.390 340hp (250kW) 1672Nm
New Holland T8000
5 engines avg. +52 hp
→
T8010 222hp (163kW) 1022Nm·T8020 248hp (182kW) 1162Nm·T8030 273hp (201kW) 1285Nm·T8040 303hp (223kW) 1300Nm·T8050 325hp (239kW) 1450Nm
New Holland T4
4 engines avg. +21 hp
→
T4.105 106hp (78kW) 444Nm·T4.115 114hp (84kW) 461Nm·T4.85 84hp (62kW) 351Nm·T4.95 98hp (72kW) 407Nm
New Holland TS
3 engines avg. +28 hp
→
110A 116hp (85kW) 520Nm·125A 125hp (92kW) 566Nm·135A 136hp (100kW) 612Nm
New Holland TM
2 engines avg. +44 hp
→
175 177hp (130kW) 780Nm·190 193hp (142kW) 864Nm

About New Holland chip tuning

Engines and platforms:
  • Main engines: FPT NEF F4D 4.5L, F4H 4.5L, F5D 3.4L, F5C 3.2L, FPT Cursor 9 8.7L, Cursor 11 11.1L, Cursor 13 12.9L, F1A 2.3, F1C 3.0
  • Platforms: T3, T4, T5, T6, T7, T8, T9 (large 4WD), CR/CX combines, Boomer compact
Supported ECUs:
  • Manufacturers: Bosch / Continental / Denso / Siemens
  • Specific New Holland units in the database: Bosch EDC17C49 (NEF), EDC17CV41 (Cursor newer), EDC17CV44, EDC17C69, EDC7UC31, EDC16C39, FPT MJD7C.X (Magneti Marelli, NEF on small), MJD8F.X, FPT IPC (Implement Power Controller), FPT-specific Heuristic ECMs, IntelliView monitor
  • New Holland specifics: FPT ECU (F1A platform) — DPF/SCR disable on T7 / T8 series
Service terms:
  • Calibrations are done by hand in WinOLS5 + Ghidra for each specific control unit
  • Checksums are recalculated on the engineer's side — the file is ready to flash with a current programmer
  • File returned within 30-60 minutes during working hours
  • Free revisions based on an OBD log