Mitsubishi Space Star 1.9 DI-D 115 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Mitsubishi Space Star 1.9 DI-D 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Space Star 1.9 DI-D 115 hp ECU
Mitsubishi Space Star (2004) 1.9 DI-D 115 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1870). Stage 1 chip tuning raises power from 115 to 140 hp (+25 hp, +22%) and torque from 265 to 340 Nm (+75 Nm). The 2004 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Mitsubishi is a Japanese carmaker, part of the Renault-Nissan-Mitsubishi Alliance since 2016. Mitsubishi specialises in off-roaders, crossovers and pickups. The Lancer Evolution is Mitsubishi's iconic rally model and a legend of JDM culture. DPF/SCR with AdBlue is standard on Euro-6 Mitsubishi diesels. Mid-range Mitsubishi diesels are a mainstream chip tuning subject in the commercial segment. Mitsubishi has its own diesels for pickups and off-roaders (4N, 4M).
On Mitsubishi diesels, Stage 1 delivers a noticeable torque gain for off-road use. The Mitsubishi community is active in the JDM segment (Lancer Evo). Within the Renault-Nissan-Mitsubishi Alliance, ECUs are partly standardised. Mid-range Mitsubishi — a high-volume chip tuning subject for off-road use.
Frequently asked questions
How much does the power of the Mitsubishi Space Star 1.9 DI-D 115 hp increase after Stage 1?
The Stage 1 gain for the Mitsubishi Space Star 1.9 DI-D 115 hp is 25 hp (+22%) over the stock 115 hp, for a total of 140 hp. Torque rises from 265 to 340 Nm (+75 Nm).
What is Stage 1 chip tuning for the Mitsubishi Space Star?
Stage 1 is a software optimization of the factory ECU firmware of the Mitsubishi Space Star with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
What is the risk of Stage 1 on the Mitsubishi Space Star 1.9 DI-D 115 hp?
A remap of the Mitsubishi Space Star 1.9 DI-D 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mitsubishi Space Star 1.9 DI-D 115 hp?
Stage 2 on the Mitsubishi Space Star 1.9 DI-D 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Mitsubishi Space Star remain valid after Stage 1?
After remapping the Mitsubishi Space Star, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mitsubishi Space Star?
Reading and writing via OBD takes 25-30 minutes on the Mitsubishi Space Star. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mitsubishi Space Star?
Before Stage 1 the original of the Mitsubishi Space Star 1.9 DI-D 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mitsubishi Space Star 1.9 DI-D 115 hp cost?
The remap price for the Mitsubishi Space Star 1.9 DI-D 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.