Mitsubishi Outlander 2.0 MIVEC 150 hp — Stage 1 file (+9 hp)
hp
Stage 1 file for Mitsubishi Outlander 2.0 MIVEC 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Outlander 2.0 MIVEC 150 hp ECU
Mitsubishi Outlander (2019) 2.0 MIVEC 150 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1870). Stage 1 chip tuning raises power from 150 to 159 hp (+9 hp, +6%) and torque from 195 to 205 Nm (+10 Nm). In the CHIPOK database: 2 configurations. A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Mitsubishi is a Japanese carmaker, part of the Renault-Nissan-Mitsubishi Alliance since 2016. Mitsubishi specialises in off-roaders, crossovers and pickups. The Lancer Evolution is Mitsubishi's iconic rally model and a legend of JDM culture. Mitsubishi's 4G engine series is an iconic piece of JDM heritage (also used in Smart). On Mitsubishi turbo petrol engines, Stage 1 delivers a noticeable gain. Mitsubishi's petrol range comprises naturally aspirated and turbo engines.
On modern Mitsubishi models, Bench is often needed for the top models. The Mitsubishi community is active in the JDM segment (Lancer Evo). Within the Renault-Nissan-Mitsubishi Alliance, ECUs are partly standardised. Mid-range Mitsubishi — a high-volume chip tuning subject for off-road use.
Frequently asked questions
How much horsepower does Stage 1 add for the Mitsubishi Outlander 2.0 MIVEC 150 hp?
After Stage 1 the power of the Mitsubishi Outlander 2.0 MIVEC 150 hp rises from 150 to 159 hp, a gain of 9 hp (+6%). Torque rises from 195 to 205 Nm (+10 Nm).
How does Stage 1 differ from stock on the Mitsubishi Outlander?
Stage 1 is a software optimization of the factory ECU firmware of the Mitsubishi Outlander with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +9 hp with no hardware changes.
What is the risk of Stage 1 on the Mitsubishi Outlander 2.0 MIVEC 150 hp?
A remap of the Mitsubishi Outlander 2.0 MIVEC 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mitsubishi Outlander 2.0 MIVEC 150 hp?
Stage 2 on the Mitsubishi Outlander 2.0 MIVEC 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Mitsubishi Outlander remain valid after Stage 1?
After remapping the Mitsubishi Outlander, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mitsubishi Outlander?
Reading and writing via OBD takes 25-30 minutes on the Mitsubishi Outlander. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mitsubishi Outlander?
Before Stage 1 the original of the Mitsubishi Outlander 2.0 MIVEC 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mitsubishi Outlander 2.0 MIVEC 150 hp cost?
The remap price for the Mitsubishi Outlander 2.0 MIVEC 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.