Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp — Stage 1 file (+9 hp)
hp
Stage 1 file for Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp ECU
Mitsubishi Outlander (2013) 2.0 MIVEC PHEV 121 hp — mass-market hybrid engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1870). Stage 1 chip tuning raises power from 121 to 130 hp (+9 hp, +7%) and torque from 190 to 200 Nm (+10 Nm).
The Pajero and L200 are Mitsubishi's high-volume off-roaders and pickups. The Outlander PHEV is the flagship of Mitsubishi's hybrid range. Mitsubishi shares some engines with Renault and Nissan within the Alliance. The Eclipse Cross PHEV is a compact PHEV crossover. The Mitsubishi i-MiEV (legacy) was one of the first mass-produced electric cars. The Outlander PHEV is Mitsubishi's flagship PHEV crossover with a distinctive architecture.
Within the Renault-Nissan-Mitsubishi Alliance, ECUs are partly standardised. The Mitsubishi community is active in the JDM segment (Lancer Evo). Mid-range Mitsubishi — a high-volume chip tuning subject for off-road use.
Frequently asked questions
How much horsepower does Stage 1 add for the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp?
Stage 1 for the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp adds +9 hp — power increases from 121 to 130 hp (+7%). Torque rises from 190 to 200 Nm (+10 Nm).
What does a Stage 1 remap of the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mitsubishi Outlander with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +9 hp with no hardware changes.
What is the risk of Stage 1 on the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp?
A remap of the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp?
Stage 2 for the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Mitsubishi Outlander remain valid after Stage 1?
After remapping the Mitsubishi Outlander, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mitsubishi Outlander?
Reading and writing via OBD takes 25-30 minutes on the Mitsubishi Outlander. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mitsubishi Outlander?
Before Stage 1 the original of the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp cost?
The remap price for the Mitsubishi Outlander 2.0 MIVEC PHEV 121 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.