Mitsubishi Outlander 2.0 MIVEC 150 hp — Stage 1 file (+9 hp)
hp
Stage 1 file for Mitsubishi Outlander 2.0 MIVEC 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Outlander 2.0 MIVEC 150 hp ECU
Mitsubishi Outlander (2013) 2.0 MIVEC 150 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1870). Stage 1 chip tuning raises power from 150 to 159 hp (+9 hp, +6%) and torque from 195 to 205 Nm (+10 Nm). In the CHIPOK database: 2 configurations. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
Mitsubishi shares some engines with Renault and Nissan within the Alliance. Mitsubishi is a Japanese carmaker, part of the Renault-Nissan-Mitsubishi Alliance since 2016. Mitsubishi specialises in off-roaders, crossovers and pickups. Mitsubishi's petrol range comprises naturally aspirated and turbo engines. Mitsubishi's 4G engine series is an iconic piece of JDM heritage (also used in Smart). On Mitsubishi turbo petrol engines, Stage 1 delivers a noticeable gain.
Within the Renault-Nissan-Mitsubishi Alliance, ECUs are partly standardised. The Mitsubishi community is active in the JDM segment (Lancer Evo). Mid-range Mitsubishi — a high-volume chip tuning subject for off-road use.
Frequently asked questions
How many horsepower does the Mitsubishi Outlander 2.0 MIVEC 150 hp reach after a remap?
Stage 1 chip tuning on the Mitsubishi Outlander 2.0 MIVEC 150 hp boosts engine output by 9 hp: from 150 to 159 hp. Torque rises from 195 to 205 Nm (+10 Nm).
What changes in the Mitsubishi Outlander ECU after Stage 1?
Stage 1 on the Mitsubishi Outlander 2.0 MIVEC 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +9 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 MIVEC 150 hp?
Stage 1 on the Mitsubishi Outlander 2.0 MIVEC 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mitsubishi Outlander 2.0 MIVEC 150 hp?
Stage 2 for the Mitsubishi Outlander 2.0 MIVEC 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Mitsubishi Outlander?
Stage 1 on the Mitsubishi Outlander voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mitsubishi Outlander 2.0 MIVEC 150 hp done?
The full remap cycle for the Mitsubishi Outlander — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mitsubishi Outlander?
The original Mitsubishi Outlander ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mitsubishi Outlander 2.0 MIVEC 150 hp?
The cost of Stage 1 for the Mitsubishi Outlander 2.0 MIVEC 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.