Mitsubishi Lancer 1.8i (lancer) 140 hp — Stage 1 file (+5 hp)
hp
Stage 1 file for Mitsubishi Lancer 1.8i (lancer) 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Lancer 1.8i (lancer) 140 hp ECU
Mitsubishi Lancer (2007) 1.8i (lancer) 140 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1870). Stage 1 chip tuning raises power from 140 to 145 hp (+5 hp, +4%) and torque from 176 to 180 Nm (+4 Nm). A petrol engine built in 2007 — the era before widespread firmware encryption, OBD flash without complications.
The Pajero and L200 are Mitsubishi's high-volume off-roaders and pickups. The Outlander PHEV is the flagship of Mitsubishi's hybrid range. Mitsubishi shares some engines with Renault and Nissan within the Alliance. Mitsubishi's 4G engine series is an iconic piece of JDM heritage (also used in Smart). On Mitsubishi turbo petrol engines, Stage 1 delivers a noticeable gain. Mitsubishi's petrol range comprises naturally aspirated and turbo engines.
Within the Renault-Nissan-Mitsubishi Alliance, ECUs are partly standardised. The Mitsubishi community is active in the JDM segment (Lancer Evo). Mid-range Mitsubishi — a high-volume chip tuning subject for off-road use.
Frequently asked questions
What is the Stage 1 effect on the Mitsubishi Lancer 1.8i (lancer) 140 hp?
Stage 1 for the Mitsubishi Lancer 1.8i (lancer) 140 hp adds +5 hp — power increases from 140 to 145 hp (+4%). Torque rises from 176 to 180 Nm (+4 Nm).
What does a Stage 1 remap of the Mitsubishi Lancer 1.8i (lancer) 140 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mitsubishi Lancer with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +5 hp with no hardware changes.
What is the risk of Stage 1 on the Mitsubishi Lancer 1.8i (lancer) 140 hp?
A remap of the Mitsubishi Lancer 1.8i (lancer) 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mitsubishi Lancer 1.8i (lancer) 140 hp?
Stage 2 for the Mitsubishi Lancer 1.8i (lancer) 140 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Mitsubishi Lancer remain valid after Stage 1?
After remapping the Mitsubishi Lancer, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mitsubishi Lancer?
Reading and writing via OBD takes 25-30 minutes on the Mitsubishi Lancer. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mitsubishi Lancer?
Before Stage 1 the original of the Mitsubishi Lancer 1.8i (lancer) 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mitsubishi Lancer 1.8i (lancer) 140 hp cost?
The remap price for the Mitsubishi Lancer 1.8i (lancer) 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.