Mitsubishi Eclipse Cross 2.2 DiD 150hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Mitsubishi Eclipse Cross 2.2 DiD 150hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Eclipse Cross 2.2 DiD 150hp ECU
Mitsubishi Eclipse Cross (2017 ->) 2.2 DiD 150hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1870). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 400 to 450 Nm (+50 Nm). The 2017 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Lancer Evolution is Mitsubishi's iconic rally model and a legend of JDM culture. The Pajero and L200 are Mitsubishi's high-volume off-roaders and pickups. The Outlander PHEV is the flagship of Mitsubishi's hybrid range. Mitsubishi has its own diesels for pickups and off-roaders (4N, 4M). DPF/SCR with AdBlue is standard on Euro-6 Mitsubishi diesels. Mid-range Mitsubishi diesels are a mainstream chip tuning subject in the commercial segment.
Within the Renault-Nissan-Mitsubishi Alliance, ECUs are partly standardised. On Mitsubishi diesels, Stage 1 delivers a noticeable torque gain for off-road use. The Mitsubishi community is active in the JDM segment (Lancer Evo). Mid-range Mitsubishi — a high-volume chip tuning subject for off-road use.
Frequently asked questions
How much horsepower does Stage 1 add for the Mitsubishi Eclipse Cross 2.2 DiD 150hp?
The Stage 1 gain for the Mitsubishi Eclipse Cross 2.2 DiD 150hp is 35 hp (+23%) over the stock 150 hp, for a total of 185 hp. Torque rises from 400 to 450 Nm (+50 Nm).
What is Stage 1 chip tuning for the Mitsubishi Eclipse Cross?
Stage 1 on the Mitsubishi Eclipse Cross 2.2 DiD 150hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.2 DiD 150hp?
Stage 1 on the Mitsubishi Eclipse Cross 2.2 DiD 150hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mitsubishi Eclipse Cross 2.2 DiD 150hp?
Stage 2 on the Mitsubishi Eclipse Cross 2.2 DiD 150hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Mitsubishi Eclipse Cross?
Stage 1 on the Mitsubishi Eclipse Cross voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mitsubishi Eclipse Cross 2.2 DiD 150hp done?
The full remap cycle for the Mitsubishi Eclipse Cross — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mitsubishi Eclipse Cross?
The original Mitsubishi Eclipse Cross ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mitsubishi Eclipse Cross 2.2 DiD 150hp?
The cost of Stage 1 for the Mitsubishi Eclipse Cross 2.2 DiD 150hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.