Mitsubishi Colt 1.5 T 150 hp — Stage 1 file (+43 hp)
hp
Stage 1 file for Mitsubishi Colt 1.5 T 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mitsubishi Colt 1.5 T 150 hp ECU
Mitsubishi Colt (2004) 1.5 T 150 hp — mass-market petrol engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance group (Япония, 1870). Stage 1 chip tuning raises power from 150 to 193 hp (+43 hp, +29%) and torque from 210 to 274 Nm (+64 Nm). ECU — Bosch ME17.8.8. Flashing method: OBD or Bench depending on the unit's protection. The 2004 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
The Lancer Evolution is Mitsubishi's iconic rally model and a legend of JDM culture. The Pajero and L200 are Mitsubishi's high-volume off-roaders and pickups. The Outlander PHEV is the flagship of Mitsubishi's hybrid range. Mitsubishi's petrol range comprises naturally aspirated and turbo engines. Mitsubishi's 4G engine series is an iconic piece of JDM heritage (also used in Smart). On Mitsubishi turbo petrol engines, Stage 1 delivers a noticeable gain.
The Mitsubishi community is active in the JDM segment (Lancer Evo). Within the Renault-Nissan-Mitsubishi Alliance, ECUs are partly standardised. Mid-range Mitsubishi — a high-volume chip tuning subject for off-road use.
Frequently asked questions
What power gain do you get after chip tuning the Mitsubishi Colt 1.5 T 150 hp?
The Stage 1 gain for the Mitsubishi Colt 1.5 T 150 hp is 43 hp (+29%) over the stock 150 hp, for a total of 193 hp. Torque rises from 210 to 274 Nm (+64 Nm).
What is Stage 1 chip tuning for the Mitsubishi Colt?
Stage 1 on the Mitsubishi Colt 1.5 T 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +43 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 T 150 hp?
Stage 1 on the Mitsubishi Colt 1.5 T 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mitsubishi Colt 1.5 T 150 hp?
Stage 2 on the Mitsubishi Colt 1.5 T 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Mitsubishi Colt 1.5 T 150 hp run?
The control unit of the Mitsubishi Colt 1.5 T 150 hp is the Bosch ME17.8.8. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Mitsubishi Colt?
Stage 1 on the Mitsubishi Colt voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mitsubishi Colt 1.5 T 150 hp done?
The full remap cycle for the Mitsubishi Colt — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mitsubishi Colt?
The original Mitsubishi Colt ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mitsubishi Colt 1.5 T 150 hp?
The cost of Stage 1 for the Mitsubishi Colt 1.5 T 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.