Mini One 1.6d (mini) 90 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Mini One 1.6d (mini) 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mini One 1.6d (mini) 90 hp ECU
Mini One (2010 - R56) 1.6d (mini) 90 hp — mass-market diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 90 to 140 hp (+50 hp, +56%) and torque from 215 to 320 Nm (+105 Nm). ECU — Bosch EDC17C41. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
JCW (John Cooper Works) is Mini's performance division. The Mini range comprises the Cooper, Countryman, Clubman and Aceman. Mini specialises in premium-level compact hatchbacks and crossovers. BMW diesels are known for high torque, and Stage 1 delivers an especially noticeable Nm gain.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. On low-output engines, Stage 1 is safe and does not over-stress the hardware. On naturally aspirated engines without a turbo, the main effect is on throttle response. In the city segment, Stage 1 is more about comfort than power.
Frequently asked questions
How much does the power of the Mini One 1.6d (mini) 90 hp increase after Stage 1?
After Stage 1 the power of the Mini One 1.6d (mini) 90 hp rises from 90 to 140 hp, a gain of 50 hp (+56%). Torque rises from 215 to 320 Nm (+105 Nm).
How does Stage 1 differ from stock on the Mini One?
Stage 1 is a software optimization of the factory ECU firmware of the Mini One with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Is Stage 1 worth doing on the base Mini One?
Stage 1 on the base Mini One is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
What is Stage 2 for the Mini One 1.6d (mini) 90 hp?
Stage 2 on the Mini One 1.6d (mini) 90 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Mini One 1.6d (mini) 90 hp use?
The Mini One 1.6d (mini) 90 hp is fitted with the Bosch EDC17C41 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Mini One remain valid after Stage 1?
After remapping the Mini One, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mini One?
Reading and writing via OBD takes 25-30 minutes on the Mini One. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mini One?
Before Stage 1 the original of the Mini One 1.6d (mini) 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mini One 1.6d (mini) 90 hp cost?
The remap price for the Mini One 1.6d (mini) 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.