Mini One 1.6D 90 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Mini One 1.6D 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mini One 1.6D 90 hp ECU
Mini One (2007 - R56) 1.6D 90 hp — mass-market diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 90 to 140 hp (+50 hp, +56%) and torque from 210 to 320 Nm (+110 Nm). ECU — Bosch EDC16C35. Flashing method: OBD or Bench depending on the unit's protection. Diesel engines built in 2007 — the era of classic Common Rail without strong encryption.
Mini specialises in premium-level compact hatchbacks and crossovers. Mini shares platforms and engines with BMW (UKL/FAAR). Mini is a British compact-car brand, part of the BMW Group since 1994. DPF/SCR with AdBlue is standard on all Euro-6 BMW diesels.
Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. On low-output engines, Stage 1 is safe and does not over-stress the hardware. On naturally aspirated engines without a turbo, the main effect is on throttle response. In the city segment, Stage 1 is more about comfort than power.
Frequently asked questions
What power gain do you get after chip tuning the Mini One 1.6D 90 hp?
Stage 1 for the Mini One 1.6D 90 hp adds +50 hp — power increases from 90 to 140 hp (+56%). Torque rises from 210 to 320 Nm (+110 Nm).
What does a Stage 1 remap of the Mini One 1.6D 90 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mini One with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Is Stage 1 worth doing on the base Mini One?
Yes, Stage 1 on the low-output Mini One 1.6D 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
What is Stage 2 for the Mini One 1.6D 90 hp?
Stage 2 for the Mini One 1.6D 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Mini One 1.6D 90 hp use?
The Mini One 1.6D 90 hp is fitted with the Bosch EDC16C35 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Mini One remain valid after Stage 1?
After remapping the Mini One, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mini One?
Reading and writing via OBD takes 25-30 minutes on the Mini One. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mini One?
Before Stage 1 the original of the Mini One 1.6D 90 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mini One 1.6D 90 hp cost?
The remap price for the Mini One 1.6D 90 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.