Mini Cooper 16d (1.5) 116 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for Mini Cooper 16d (1.5) 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mini Cooper 16d (1.5) 116 hp ECU
Mini Cooper (2014 - F56) 16d (1.5) 116 hp — mass-market diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 116 to 140 hp (+24 hp, +21%) and torque from 270 to 320 Nm (+50 Nm). This engine ships with different ECU variants: Bosch EDC17C50, Bosch MD1CS001. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2014 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Mini shares platforms and engines with BMW (UKL/FAAR). Mini is a British compact-car brand, part of the BMW Group since 1994. JCW (John Cooper Works) is Mini's performance division. DPF/SCR with AdBlue is standard on all Euro-6 BMW diesels.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe.
Frequently asked questions
How many horsepower does the Mini Cooper 16d (1.5) 116 hp reach after a remap?
The Stage 1 gain for the Mini Cooper 16d (1.5) 116 hp is 24 hp (+21%) over the stock 116 hp, for a total of 140 hp. Torque rises from 270 to 320 Nm (+50 Nm).
What is Stage 1 chip tuning for the Mini Cooper?
Stage 1 on the Mini Cooper 16d (1.5) 116 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +24 hp with no hardware changes.
Is a Stage 1 remap safe for the 16d (1.5) 116 hp?
Stage 1 on the Mini Cooper 16d (1.5) 116 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mini Cooper 16d (1.5) 116 hp?
Stage 2 on the Mini Cooper 16d (1.5) 116 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Mini Cooper 16d (1.5) 116 hp have?
The Mini Cooper 16d (1.5) 116 hp has 2 ECU variants: Bosch EDC17C50, Bosch MD1CS001. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Mini Cooper?
Stage 1 on the Mini Cooper voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mini Cooper 16d (1.5) 116 hp done?
The full remap cycle for the Mini Cooper — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mini Cooper?
The original Mini Cooper ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mini Cooper 16d (1.5) 116 hp?
The cost of Stage 1 for the Mini Cooper 16d (1.5) 116 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.