Mini Cooper 2.0d 112 hp — Stage 1 file (+68 hp)
hp
Stage 1 file for Mini Cooper 2.0d 112 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mini Cooper 2.0d 112 hp ECU
Mini Cooper (2010 - R56) 2.0d 112 hp — mass-market diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 112 to 180 hp (+68 hp, +61%) and torque from 270 to 380 Nm (+110 Nm). This engine ships with different ECU variants: Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
JCW (John Cooper Works) is Mini's performance division. The Mini range comprises the Cooper, Countryman, Clubman and Aceman. Mini specialises in premium-level compact hatchbacks and crossovers. DPF/SCR with AdBlue is standard on all Euro-6 BMW diesels.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life.
Frequently asked questions
How much does the power of the Mini Cooper 2.0d 112 hp increase after Stage 1?
The Stage 1 gain for the Mini Cooper 2.0d 112 hp is 68 hp (+61%) over the stock 112 hp, for a total of 180 hp. Torque rises from 270 to 380 Nm (+110 Nm).
What is Stage 1 chip tuning for the Mini Cooper?
Stage 1 chip tuning of the Mini Cooper is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +68 hp with no hardware changes.
Can you do Stage 1 on the Mini Cooper 2.0d 112 hp?
Yes, Stage 1 for the Mini Cooper 2.0d 112 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Mini Cooper?
Stage 2 on the Mini Cooper 2.0d 112 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Mini Cooper 2.0d 112 hp?
The Mini Cooper 2.0d 112 hp was fitted with different ECUs depending on the year and trim: Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Mini Cooper warranty after chip tuning?
The factory warranty of the Mini Cooper does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mini Cooper take?
On the Mini Cooper 2.0d 112 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mini Cooper?
Yes, the original ECU firmware of the Mini Cooper 2.0d 112 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mini Cooper?
Stage 1 for the Mini Cooper 2.0d 112 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.