Mini Cooper S 2.0T 192 hp — Stage 1 file (+58 hp)
hp
Stage 1 file for Mini Cooper S 2.0T 192 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mini Cooper S 2.0T 192 hp ECU
Mini Cooper S (2014 - F56) 2.0T 192 hp — mass-market petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 192 to 250 hp (+58 hp, +30%) and torque from 280 to 380 Nm (+100 Nm). This engine ships with different ECU variants: Bosch MEVD17.2.3, Bosch MG1CS201. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 2 ECU variants. The 2014 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Mini shares platforms and engines with BMW (UKL/FAAR). Mini is a British compact-car brand, part of the BMW Group since 1994. JCW (John Cooper Works) is Mini's performance division. Third-party flash platforms are an industry of their own for the BMW community. The factory calibration on BMW petrol engines is conservative, leaving headroom for Stage 1 without hardware changes. Mid-range BMW turbo petrol engines are a mainstream Stage 1 subject with a proven base.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life.
Frequently asked questions
How many horsepower does the Mini Cooper S 2.0T 192 hp reach after a remap?
The Stage 1 gain for the Mini Cooper S 2.0T 192 hp is 58 hp (+30%) over the stock 192 hp, for a total of 250 hp. Torque rises from 280 to 380 Nm (+100 Nm).
What is Stage 1 chip tuning for the Mini Cooper S?
Stage 1 chip tuning of the Mini Cooper S is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +58 hp with no hardware changes.
Can you do Stage 1 on the Mini Cooper S 2.0T 192 hp?
Yes, Stage 1 for the Mini Cooper S 2.0T 192 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Mini Cooper S?
Stage 2 on the Mini Cooper S 2.0T 192 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Mini Cooper S 2.0T 192 hp?
The Mini Cooper S 2.0T 192 hp was fitted with different ECUs depending on the year and trim: Bosch MEVD17.2.3, Bosch MG1CS201. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Mini Cooper S warranty after chip tuning?
The factory warranty of the Mini Cooper S does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mini Cooper S take?
On the Mini Cooper S 2.0T 192 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mini Cooper S?
Yes, the original ECU firmware of the Mini Cooper S 2.0T 192 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mini Cooper S?
Stage 1 for the Mini Cooper S 2.0T 192 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.