Mini Clubman 1.5T 102 hp — Stage 1 file (+73 hp)
hp
Stage 1 file for Mini Clubman 1.5T 102 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mini Clubman 1.5T 102 hp ECU
Mini Clubman (2015 - F54) 1.5T 102 hp — mass-market petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 102 to 175 hp (+73 hp, +72%) and torque from 180 to 250 Nm (+70 Nm). ECU — Bosch MEVD17.2.3. Flashing method: OBD or Bench depending on the unit's protection. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Mini shares platforms and engines with BMW (UKL/FAAR). Mini is a British compact-car brand, part of the BMW Group since 1994. JCW (John Cooper Works) is Mini's performance division. Mid-range BMW turbo petrol engines are a mainstream Stage 1 subject with a proven base. Mid-generation petrol models use standard OBD flash. The BMW petrol range spans the mainstream segment and the sporting M-series.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on standard mid-range BMW petrol engines delivers a noticeable gain with no hardware changes. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
How many horsepower does the Mini Clubman 1.5T 102 hp reach after a remap?
After Stage 1 the power of the Mini Clubman 1.5T 102 hp rises from 102 to 175 hp, a gain of 73 hp (+72%). Torque rises from 180 to 250 Nm (+70 Nm).
How does Stage 1 differ from stock on the Mini Clubman?
Stage 1 is a software optimization of the factory ECU firmware of the Mini Clubman with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +73 hp with no hardware changes.
What is the risk of Stage 1 on the Mini Clubman 1.5T 102 hp?
A remap of the Mini Clubman 1.5T 102 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mini Clubman 1.5T 102 hp?
Stage 2 on the Mini Clubman 1.5T 102 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Mini Clubman 1.5T 102 hp use?
The Mini Clubman 1.5T 102 hp is fitted with the Bosch MEVD17.2.3 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Mini Clubman remain valid after Stage 1?
After remapping the Mini Clubman, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mini Clubman?
Reading and writing via OBD takes 25-30 minutes on the Mini Clubman. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mini Clubman?
Before Stage 1 the original of the Mini Clubman 1.5T 102 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mini Clubman 1.5T 102 hp cost?
The remap price for the Mini Clubman 1.5T 102 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.