Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm — Stage 1 file (+56 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm ECU

Mercedes Travego Bus (I (1999+)) OM471 LA 12.8 476hp (350kW) 2100Nm — premium diesel engine of the commercial segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 476 to 532 hp (+56 hp, +12%) and torque from 2100 to 2250 Nm (+150 Nm). Diesel engines built in 1999 — the era of classic Common Rail without strong encryption.

AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. Maybach is Mercedes's ultra-luxury sub-brand. On older Mercedes diesels, Stage 1 is flashed over OBD with no complications. Mercedes diesels are known for smooth, quiet running, a hallmark of the premium segment. Mercedes diesels have long been known for legendary reliability, with German taxi fleets running to million-kilometre mileages.

AMG engines confidently reach Stage 2 with a downpipe + intake. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects. Bench reading is a mandatory procedure for modern AMG models. Top AMG engines sit at the Mercedes power ceiling, and the gain is significant.

Frequently asked questions

What is the Stage 1 effect on the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm?

Stage 1 for the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm adds +56 hp — power increases from 476 to 532 hp (+12%). Torque rises from 2100 to 2250 Nm (+150 Nm).

What does a Stage 1 remap of the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm include?

Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Travego Bus with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +56 hp with no hardware changes.

Does Stage 1 make sense on the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm with this much power?

On the top-spec Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.

What is Stage 2 for the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm?

Stage 2 for the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

Does the factory warranty of the Mercedes Travego Bus remain valid after Stage 1?

After remapping the Mercedes Travego Bus, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Mercedes Travego Bus?

Reading and writing via OBD takes 25-30 minutes on the Mercedes Travego Bus. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Mercedes Travego Bus?

Before Stage 1 the original of the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm cost?

The remap price for the Mercedes Travego Bus OM471 LA 12.8 476hp (350kW) 2100Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno