Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp — Stage 1 file (+75 hp)
hp
Stage 1 file for Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp ECU
Mercedes Sprinter (2006 - W906) 219/319/419/519 CDI (3.0) 190 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 190 to 265 hp (+75 hp, +39%) and torque from 440 to 530 Nm (+90 Nm). This engine ships with different ECU variants: Bosch EDC17CP01, Bosch EDC17CP10, Bosch EDC17CP46, Bosch EDC17CP57, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. Maybach is Mercedes's ultra-luxury sub-brand. Mercedes-Benz is the world's oldest carmaker, founded in 1926 by the merger of Daimler-Motoren-Gesellschaft and Benz & Cie. Mercedes diesels are known for smooth, quiet running, a hallmark of the premium segment. Mercedes diesels have long been known for legendary reliability, with German taxi fleets running to million-kilometre mileages. Mercedes pioneered CDI (Common-rail Direct Injection) technology on passenger-car diesels, in series production since 1997.
The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. Stage 1 on mid-range Mercedes diesels delivers a noticeable torque gain. The Mercedes factory calibration allows a confident move to Stage 1 without hardware changes. The Mercedes community is active in Europe, with a large pool of available Stage files. Mid-range Mercedes engines are a premium segment with a conservative factory calibration, and Stage 1 preserves engine life. Mercedes prioritises smooth running, and Stage 1 preserves the engine's character.
Frequently asked questions
What power gain do you get after chip tuning the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp?
The Stage 1 gain for the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp is 75 hp (+39%) over the stock 190 hp, for a total of 265 hp. Torque rises from 440 to 530 Nm (+90 Nm).
What is Stage 1 chip tuning for the Mercedes Sprinter?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Sprinter with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +75 hp with no hardware changes.
What is the risk of Stage 1 on the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp?
A remap of the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp?
Stage 2 on the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp built with?
The Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp comes with 5 ECU variants: Bosch EDC17CP01, Bosch EDC17CP10, Bosch EDC17CP46, Bosch EDC17CP57, Siemens/Continental VGSx-NAG2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes Sprinter remain valid after Stage 1?
After remapping the Mercedes Sprinter, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Sprinter?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Sprinter. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Sprinter?
Before Stage 1 the original of the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp cost?
The remap price for the Mercedes Sprinter 219/319/419/519 CDI (3.0) 190 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.