Mercedes SLC 180 EU6 (1.6T) 156 hp — Stage 1 file (+19 hp)
hp
Stage 1 file for Mercedes SLC 180 EU6 (1.6T) 156 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes SLC 180 EU6 (1.6T) 156 hp ECU
Mercedes SLC (2016) 180 EU6 (1.6T) 156 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 156 to 175 hp (+19 hp, +12%) and torque from 250 to 300 Nm (+50 Nm). This engine ships with different ECU variants: Bosch MED17.7.2, Bosch VGS3-NAG3, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2016 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Mercedes-Benz is the world's oldest carmaker, founded in 1926 by the merger of Daimler-Motoren-Gesellschaft and Benz & Cie. The Mercedes slogan is 'Das Beste oder nichts' ('The best or nothing'). Smart is Mercedes's city sub-brand, historically running Mitsubishi and Renault engines. Mid-range Mercedes turbo petrol engines are a mainstream Stage 1 subject. Mid-generation petrol models use standard OBD flash. The Mercedes petrol range spans compacts, premium saloons, SUVs, roadsters and AMG flagships.
The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. On Mercedes up to the recent generation, Stage 1 OBD flash is available. The Mercedes factory calibration allows a confident move to Stage 1 without hardware changes. The Mercedes community is active in Europe, with a large pool of available Stage files. Mid-range Mercedes engines are a premium segment with a conservative factory calibration, and Stage 1 preserves engine life. Mercedes prioritises smooth running, and Stage 1 preserves the engine's character.
Frequently asked questions
How much horsepower does Stage 1 add for the Mercedes SLC 180 EU6 (1.6T) 156 hp?
The Stage 1 gain for the Mercedes SLC 180 EU6 (1.6T) 156 hp is 19 hp (+12%) over the stock 156 hp, for a total of 175 hp. Torque rises from 250 to 300 Nm (+50 Nm).
What is Stage 1 chip tuning for the Mercedes SLC?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes SLC with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +19 hp with no hardware changes.
What is the risk of Stage 1 on the Mercedes SLC 180 EU6 (1.6T) 156 hp?
A remap of the Mercedes SLC 180 EU6 (1.6T) 156 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mercedes SLC 180 EU6 (1.6T) 156 hp?
Stage 2 on the Mercedes SLC 180 EU6 (1.6T) 156 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Mercedes SLC 180 EU6 (1.6T) 156 hp built with?
The Mercedes SLC 180 EU6 (1.6T) 156 hp comes with 4 ECU variants: Bosch MED17.7.2, Bosch VGS3-NAG3, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes SLC remain valid after Stage 1?
After remapping the Mercedes SLC, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes SLC?
Reading and writing via OBD takes 25-30 minutes on the Mercedes SLC. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes SLC?
Before Stage 1 the original of the Mercedes SLC 180 EU6 (1.6T) 156 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes SLC 180 EU6 (1.6T) 156 hp cost?
The remap price for the Mercedes SLC 180 EU6 (1.6T) 156 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.