Mercedes S 63 AMG S (5.5T) 585 hp — Stage 1 file (+65 hp)
hp
Stage 1 file for Mercedes S 63 AMG S (5.5T) 585 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes S 63 AMG S (5.5T) 585 hp ECU
Mercedes S (2014 - W222) 63 AMG S (5.5T) 585 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 585 to 650 hp (+65 hp, +11%) and torque from 760 to 950 Nm (+190 Nm). This engine ships with different ECU variants: Siemens/Continental CPC_NG, Bosch MED17.7.1, Bosch MED17.7.3, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 5 configurations · 5 ECU variants. A petrol engine built in 2014 — a Tricore platform without strong protection; OBD access works.
4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. The Mercedes petrol range spans compacts, premium saloons, SUVs, roadsters and AMG flagships. Brabus is an independent Mercedes tuning house specialising in top-model upgrades. The factory calibration on Mercedes petrol engines is conservative, leaving headroom for Stage 1.
AMG engines confidently reach Stage 2 with a downpipe + intake. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. Top AMG engines sit at the Mercedes power ceiling, and the gain is significant. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects.
Frequently asked questions
How much horsepower does Stage 1 add for the Mercedes S 63 AMG S (5.5T) 585 hp?
Stage 1 for the Mercedes S 63 AMG S (5.5T) 585 hp adds +65 hp — power increases from 585 to 650 hp (+11%). Torque rises from 760 to 950 Nm (+190 Nm).
What does a Stage 1 remap of the Mercedes S 63 AMG S (5.5T) 585 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes S with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +65 hp with no hardware changes.
Does Stage 1 make sense on the Mercedes S 63 AMG S (5.5T) 585 hp with this much power?
On the top-spec Mercedes S 63 AMG S (5.5T) 585 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Mercedes S 63 AMG S (5.5T) 585 hp?
Stage 2 for the Mercedes S 63 AMG S (5.5T) 585 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the Mercedes S 63 AMG S (5.5T) 585 hp built with?
The Mercedes S 63 AMG S (5.5T) 585 hp comes with 5 ECU variants: Siemens/Continental CPC_NG, Bosch MED17.7.1, Bosch MED17.7.3, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes S remain valid after Stage 1?
After remapping the Mercedes S, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes S?
Reading and writing via OBD takes 25-30 minutes on the Mercedes S. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes S?
Before Stage 1 the original of the Mercedes S 63 AMG S (5.5T) 585 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes S 63 AMG S (5.5T) 585 hp cost?
The remap price for the Mercedes S 63 AMG S (5.5T) 585 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.