Mercedes R 400 EU6 (3.0T) 333 hp — Stage 1 file (+67 hp)
hp
Stage 1 file for Mercedes R 400 EU6 (3.0T) 333 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes R 400 EU6 (3.0T) 333 hp ECU
Mercedes R (2011) 400 EU6 (3.0T) 333 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 333 to 400 hp (+67 hp, +20%) and torque from 480 to 580 Nm (+100 Nm). This engine ships with different ECU variants: Bosch MED17.7.3.1, Bosch MG1CP002, Bosch VGS3-NAG3, Siemens/Continental VGS4-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2011 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. High-output Mercedes turbo petrol engines are the flagship models, and Stage 1 delivers a solid gain. Mid-generation petrol models use standard OBD flash. The Mercedes petrol range spans compacts, premium saloons, SUVs, roadsters and AMG flagships.
The Mercedes community in Europe has a large pool of available Stage files for the standard models. On Mercedes up to the recent generation, Stage 1 OBD flash is available. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. High-output Mercedes engines are premium-class with solid headroom for Stage 1. On modern high-output Mercedes, Bench reading is often required because of the encryption. The Mercedes premium segment is a high-output platform with Stage 2 potential.
Frequently asked questions
How much does the power of the Mercedes R 400 EU6 (3.0T) 333 hp increase after Stage 1?
After Stage 1 the power of the Mercedes R 400 EU6 (3.0T) 333 hp rises from 333 to 400 hp, a gain of 67 hp (+20%). Torque rises from 480 to 580 Nm (+100 Nm).
How does Stage 1 differ from stock on the Mercedes R?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes R with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +67 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Mercedes R?
The high-output Mercedes R 400 EU6 (3.0T) 333 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Mercedes R 400 EU6 (3.0T) 333 hp?
Stage 2 on the Mercedes R 400 EU6 (3.0T) 333 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Mercedes R 400 EU6 (3.0T) 333 hp built with?
The Mercedes R 400 EU6 (3.0T) 333 hp comes with 4 ECU variants: Bosch MED17.7.3.1, Bosch MG1CP002, Bosch VGS3-NAG3, Siemens/Continental VGS4-NAG2. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes R remain valid after Stage 1?
After remapping the Mercedes R, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes R?
Reading and writing via OBD takes 25-30 minutes on the Mercedes R. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes R?
Before Stage 1 the original of the Mercedes R 400 EU6 (3.0T) 333 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes R 400 EU6 (3.0T) 333 hp cost?
The remap price for the Mercedes R 400 EU6 (3.0T) 333 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.