Mercedes G 350 BlueTec (3.0) 245 hp — Stage 1 file (+55 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Mercedes G 350 BlueTec (3.0) 245 hp ECU

Mercedes G (2000 - W463-II) 350 BlueTec (3.0) 245 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 245 to 300 hp (+55 hp, +22%) and torque from 600 to 700 Nm (+100 Nm). This engine ships with different ECU variants: Bosch EDC17CP57, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2000 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.

Smart is Mercedes's city sub-brand, historically running Mitsubishi and Renault engines. Karl Benz is credited as the inventor of the automobile with the 1886 Patent-Motorwagen. The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. Mercedes diesel engines are fitted to passenger cars and commercial vehicles. BlueTEC is Mercedes's proprietary exhaust after-treatment system with an SCR catalyst and AdBlue. High-output Mercedes diesels are premium-class with an emphasis on torque, and Stage 1 is especially felt in Nm.

In the Mercedes commercial segment, Stage 1 focuses on torque. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. The Mercedes premium segment is a high-output platform with Stage 2 potential. High-output Mercedes engines are premium-class with solid headroom for Stage 1. On modern high-output Mercedes, Bench reading is often required because of the encryption.

Frequently asked questions

What is the Stage 1 effect on the Mercedes G 350 BlueTec (3.0) 245 hp?

The Stage 1 gain for the Mercedes G 350 BlueTec (3.0) 245 hp is 55 hp (+22%) over the stock 245 hp, for a total of 300 hp. Torque rises from 600 to 700 Nm (+100 Nm).

What is Stage 1 chip tuning for the Mercedes G?

Stage 1 on the Mercedes G 350 BlueTec (3.0) 245 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +55 hp with no hardware changes.

What does Stage 1 give on the powerful Mercedes G 350 BlueTec (3.0) 245 hp?

The high-output Mercedes G 350 BlueTec (3.0) 245 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.

How does Stage 2 differ from Stage 1 on the Mercedes G 350 BlueTec (3.0) 245 hp?

Stage 2 on the Mercedes G 350 BlueTec (3.0) 245 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

How many ECU variants does the Mercedes G 350 BlueTec (3.0) 245 hp have?

The Mercedes G 350 BlueTec (3.0) 245 hp has 3 ECU variants: Bosch EDC17CP57, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.

Does Stage 1 void the warranty on the Mercedes G?

Stage 1 on the Mercedes G voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Mercedes G 350 BlueTec (3.0) 245 hp done?

The full remap cycle for the Mercedes G — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Mercedes G?

The original Mercedes G ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Mercedes G 350 BlueTec (3.0) 245 hp?

The cost of Stage 1 for the Mercedes G 350 BlueTec (3.0) 245 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno