Mercedes E 63 AMG S (4.0T) 612 hp — Stage 1 file (+58 hp)
hp
Stage 1 file for Mercedes E 63 AMG S (4.0T) 612 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes E 63 AMG S (4.0T) 612 hp ECU
Mercedes E (2020 - W213-FL) 63 AMG S (4.0T) 612 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 612 to 670 hp (+58 hp, +9%) and torque from 850 to 1000 Nm (+150 Nm). This engine ships with different ECU variants: Siemens/Continental CPC_NG, Bosch MED17.7.5, Bosch MG1CP002, Bosch VGS3-NAG3. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 8 configurations · 4 ECU variants. A modern petrol engine built in 2020 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. AMG engines are a well-known base with plenty of headroom for Stage 2. AMG Performance Studio is the factory tuning studio for bespoke work. Mercedes encryption is among the toughest in the industry, especially on modern models.
Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. The Mercedes community in Europe has a large pool of available Stage files for the standard models. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects. Bench reading is a mandatory procedure for modern AMG models.
Frequently asked questions
How much does the power of the Mercedes E 63 AMG S (4.0T) 612 hp increase after Stage 1?
After Stage 1 the power of the Mercedes E 63 AMG S (4.0T) 612 hp rises from 612 to 670 hp, a gain of 58 hp (+9%). Torque rises from 850 to 1000 Nm (+150 Nm).
How does Stage 1 differ from stock on the Mercedes E?
Stage 1 chip tuning of the Mercedes E is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +58 hp with no hardware changes.
What is the Stage 1 potential of the Mercedes E 63 AMG S (4.0T) 612 hp?
Stage 1 for the Mercedes E 63 AMG S (4.0T) 612 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How much does Stage 2 add on the Mercedes E?
Stage 2 on the Mercedes E 63 AMG S (4.0T) 612 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Mercedes E 63 AMG S (4.0T) 612 hp?
The Mercedes E 63 AMG S (4.0T) 612 hp was fitted with different ECUs depending on the year and trim: Siemens/Continental CPC_NG, Bosch MED17.7.5, Bosch MG1CP002, Bosch VGS3-NAG3. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Mercedes E warranty after chip tuning?
The factory warranty of the Mercedes E does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mercedes E take?
On the Mercedes E 63 AMG S (4.0T) 612 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mercedes E?
Yes, the original ECU firmware of the Mercedes E 63 AMG S (4.0T) 612 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mercedes E?
Stage 1 for the Mercedes E 63 AMG S (4.0T) 612 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.