Mercedes E 53 AMG (3.0T) 435 hp — Stage 1 file (+65 hp)
hp
Stage 1 file for Mercedes E 53 AMG (3.0T) 435 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes E 53 AMG (3.0T) 435 hp ECU
Mercedes E (2020 - W213-FL) 53 AMG (3.0T) 435 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 435 to 500 hp (+65 hp, +15%) and torque from 520 to 600 Nm (+80 Nm). ECU — Bosch MG1CP002. Flashing method: OBD or Bench depending on the unit's protection. A 2020 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Karl Benz is credited as the inventor of the automobile with the 1886 Patent-Motorwagen. The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. 4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. Maybach uses Mercedes engines for the ultra-luxury segment, with the emphasis on quietness and smoothness. AMG engines are a well-known base with plenty of headroom for Stage 2. AMG Performance Studio is the factory tuning studio for bespoke work.
AMG engines confidently reach Stage 2 with a downpipe + intake. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects. Bench reading is a mandatory procedure for modern AMG models. Top AMG engines sit at the Mercedes power ceiling, and the gain is significant. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler).
Frequently asked questions
What power gain do you get after chip tuning the Mercedes E 53 AMG (3.0T) 435 hp?
Stage 1 for the Mercedes E 53 AMG (3.0T) 435 hp adds +65 hp — power increases from 435 to 500 hp (+15%). Torque rises from 520 to 600 Nm (+80 Nm).
What does a Stage 1 remap of the Mercedes E 53 AMG (3.0T) 435 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes E with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +65 hp with no hardware changes.
Does Stage 1 make sense on the Mercedes E 53 AMG (3.0T) 435 hp with this much power?
On the top-spec Mercedes E 53 AMG (3.0T) 435 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Mercedes E 53 AMG (3.0T) 435 hp?
Stage 2 for the Mercedes E 53 AMG (3.0T) 435 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Mercedes E 53 AMG (3.0T) 435 hp use?
The Mercedes E 53 AMG (3.0T) 435 hp is fitted with the Bosch MG1CP002 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Mercedes E remain valid after Stage 1?
After remapping the Mercedes E, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes E?
Reading and writing via OBD takes 25-30 minutes on the Mercedes E. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes E?
Before Stage 1 the original of the Mercedes E 53 AMG (3.0T) 435 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes E 53 AMG (3.0T) 435 hp cost?
The remap price for the Mercedes E 53 AMG (3.0T) 435 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.