Mercedes E 63 AMG S (5.5T) (2010) 585 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Mercedes E 63 AMG S (5.5T) (2010) 585 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes E 63 AMG S (5.5T) (2010) 585 hp ECU
Mercedes E (2013 - W212) 63 AMG S (5.5T) (2010) 585 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 585 to 620 hp (+35 hp, +6%) and torque from 800 to 950 Nm (+150 Nm). This engine ships with different ECU variants: Bosch MED17.7.1, Bosch MED17.7.3, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
The Mercedes slogan is 'Das Beste oder nichts' ('The best or nothing'). Smart is Mercedes's city sub-brand, historically running Mitsubishi and Renault engines. Karl Benz is credited as the inventor of the automobile with the 1886 Patent-Motorwagen. Mercedes encryption is among the toughest in the industry, especially on modern models. Top AMG engines offer significant potential with a downpipe + intake. AMG is Mercedes's performance division (since 1967), acquired by Mercedes in 1999.
The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects. Bench reading is a mandatory procedure for modern AMG models.
Frequently asked questions
How much does the power of the Mercedes E 63 AMG S (5.5T) (2010) 585 hp increase after Stage 1?
Stage 1 for the Mercedes E 63 AMG S (5.5T) (2010) 585 hp adds +35 hp — power increases from 585 to 620 hp (+6%). Torque rises from 800 to 950 Nm (+150 Nm).
What does a Stage 1 remap of the Mercedes E 63 AMG S (5.5T) (2010) 585 hp include?
Stage 1 on the Mercedes E 63 AMG S (5.5T) (2010) 585 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
What does Stage 1 give on the top-spec Mercedes E 63 AMG S (5.5T) (2010) 585 hp?
On the top-spec Mercedes E 63 AMG S (5.5T) (2010) 585 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Mercedes E 63 AMG S (5.5T) (2010) 585 hp?
Stage 2 for the Mercedes E 63 AMG S (5.5T) (2010) 585 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Mercedes E 63 AMG S (5.5T) (2010) 585 hp have?
The Mercedes E 63 AMG S (5.5T) (2010) 585 hp has 3 ECU variants: Bosch MED17.7.1, Bosch MED17.7.3, Siemens/Continental VGSx-NAG2. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Mercedes E?
Stage 1 on the Mercedes E voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mercedes E 63 AMG S (5.5T) (2010) 585 hp done?
The full remap cycle for the Mercedes E — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mercedes E?
The original Mercedes E ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mercedes E 63 AMG S (5.5T) (2010) 585 hp?
The cost of Stage 1 for the Mercedes E 63 AMG S (5.5T) (2010) 585 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.