Mercedes E 350 BlueTec (3.0) 258 hp — Stage 1 file (+42 hp)
hp
Stage 1 file for Mercedes E 350 BlueTec (3.0) 258 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes E 350 BlueTec (3.0) 258 hp ECU
Mercedes E (2013 - W212) 350 BlueTec (3.0) 258 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 258 to 300 hp (+42 hp, +16%) and torque from 620 to 700 Nm (+80 Nm). This engine ships with different ECU variants: Delphi CPC2, Bosch DCU17PC01, Bosch EDC17CP10, Bosch EDC17CP46, Bosch EDC17CP57, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 14 configurations · 7 ECU variants. The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. Maybach is Mercedes's ultra-luxury sub-brand. Mercedes-Benz is the world's oldest carmaker, founded in 1926 by the merger of Daimler-Motoren-Gesellschaft and Benz & Cie. Maybach uses Mercedes engines for the ultra-luxury segment, with the emphasis on quietness and smoothness. The factory calibration on Mercedes petrol engines is conservative, leaving headroom for Stage 1. High-output Mercedes turbo petrol engines are the flagship models, and Stage 1 delivers a solid gain.
The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. On modern high-output Mercedes, Bench reading is often required because of the encryption. The Mercedes premium segment is a high-output platform with Stage 2 potential. High-output Mercedes engines are premium-class with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Mercedes E 350 BlueTec (3.0) 258 hp?
The Stage 1 gain for the Mercedes E 350 BlueTec (3.0) 258 hp is 42 hp (+16%) over the stock 258 hp, for a total of 300 hp. Torque rises from 620 to 700 Nm (+80 Nm).
What is Stage 1 chip tuning for the Mercedes E?
Stage 1 chip tuning of the Mercedes E is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +42 hp with no hardware changes.
Is Stage 1 safe on the high-output Mercedes E 350 BlueTec (3.0) 258 hp?
The high-output Mercedes E 350 BlueTec (3.0) 258 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Mercedes E?
Stage 2 on the Mercedes E 350 BlueTec (3.0) 258 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Mercedes E 350 BlueTec (3.0) 258 hp?
The Mercedes E 350 BlueTec (3.0) 258 hp was fitted with different ECUs depending on the year and trim: Delphi CPC2, Bosch DCU17PC01, Bosch EDC17CP10, Bosch EDC17CP46, Bosch EDC17CP57, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Mercedes E warranty after chip tuning?
The factory warranty of the Mercedes E does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mercedes E take?
On the Mercedes E 350 BlueTec (3.0) 258 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mercedes E?
Yes, the original ECU firmware of the Mercedes E 350 BlueTec (3.0) 258 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mercedes E?
Stage 1 for the Mercedes E 350 BlueTec (3.0) 258 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.