Mercedes E 200 BlueTEC (2.1) 136 hp — Stage 1 file (+64 hp)
hp
Stage 1 file for Mercedes E 200 BlueTEC (2.1) 136 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes E 200 BlueTEC (2.1) 136 hp ECU
Mercedes E (2013 - W212) 200 BlueTEC (2.1) 136 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 136 to 200 hp (+64 hp, +47%) and torque from 320 to 480 Nm (+160 Nm). This engine ships with different ECU variants: Delphi CRD3.7A, Delphi CRD3.E1, Delphi CRD3.F1, Delphi CRD3P.A0, Delphi CRD3P.D1, Delphi CRD3P.E1, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2, Delphi CRD3. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 9 configurations · 9 ECU variants. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels. Mid-generation diesel models use standard OBD read/write. Mercedes diesels are known for smooth, quiet running, a hallmark of the premium segment.
Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. Mid-range Mercedes engines are a premium segment with a conservative factory calibration, and Stage 1 preserves engine life. Mercedes prioritises smooth running, and Stage 1 preserves the engine's character. The Mercedes factory calibration allows a confident move to Stage 1 without hardware changes. The Mercedes community is active in Europe, with a large pool of available Stage files.
Frequently asked questions
How much does the power of the Mercedes E 200 BlueTEC (2.1) 136 hp increase after Stage 1?
After Stage 1 the power of the Mercedes E 200 BlueTEC (2.1) 136 hp rises from 136 to 200 hp, a gain of 64 hp (+47%). Torque rises from 320 to 480 Nm (+160 Nm).
How does Stage 1 differ from stock on the Mercedes E?
Stage 1 on the Mercedes E 200 BlueTEC (2.1) 136 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +64 hp with no hardware changes.
Is a Stage 1 remap safe for the 200 BlueTEC (2.1) 136 hp?
Stage 1 on the Mercedes E 200 BlueTEC (2.1) 136 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mercedes E 200 BlueTEC (2.1) 136 hp?
Stage 2 on the Mercedes E 200 BlueTEC (2.1) 136 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
How many ECU variants does the Mercedes E 200 BlueTEC (2.1) 136 hp have?
The Mercedes E 200 BlueTEC (2.1) 136 hp has 9 ECU variants: Delphi CRD3.7A, Delphi CRD3.E1, Delphi CRD3.F1, Delphi CRD3P.A0, Delphi CRD3P.D1, Delphi CRD3P.E1, Siemens/Continental VGS4-NAG2, Siemens/Continental VGSx-NAG2, Delphi CRD3. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Mercedes E?
Stage 1 on the Mercedes E voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mercedes E 200 BlueTEC (2.1) 136 hp done?
The full remap cycle for the Mercedes E — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mercedes E?
The original Mercedes E ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mercedes E 200 BlueTEC (2.1) 136 hp?
The cost of Stage 1 for the Mercedes E 200 BlueTEC (2.1) 136 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.