Mercedes CLE 200 (2.0T) MHEV 197 hp — Stage 1 file (+83 hp)
hp
Stage 1 file for Mercedes CLE 200 (2.0T) MHEV 197 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes CLE 200 (2.0T) MHEV 197 hp ECU
Mercedes CLE (2023 - A236-C236) 200 (2.0T) MHEV 197 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 197 to 280 hp (+83 hp, +42%) and torque from 320 to 420 Nm (+100 Nm). This engine ships with different ECU variants: Bosch MED17.7.7, Bosch VGS3-NAG3. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. A modern petrol engine built in 2023 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. 4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. The factory calibration on Mercedes petrol engines is conservative, leaving headroom for Stage 1. The Mercedes petrol range spans compacts, premium saloons, SUVs, roadsters and AMG flagships. Maybach uses Mercedes engines for the ultra-luxury segment, with the emphasis on quietness and smoothness.
Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. The Mercedes community in Europe has a large pool of available Stage files for the standard models. The Mercedes factory calibration allows a confident move to Stage 1 without hardware changes. The Mercedes community is active in Europe, with a large pool of available Stage files. Mid-range Mercedes engines are a premium segment with a conservative factory calibration, and Stage 1 preserves engine life. Mercedes prioritises smooth running, and Stage 1 preserves the engine's character.
Frequently asked questions
How many horsepower does the Mercedes CLE 200 (2.0T) MHEV 197 hp reach after a remap?
The Stage 1 gain for the Mercedes CLE 200 (2.0T) MHEV 197 hp is 83 hp (+42%) over the stock 197 hp, for a total of 280 hp. Torque rises from 320 to 420 Nm (+100 Nm).
What is Stage 1 chip tuning for the Mercedes CLE?
Stage 1 chip tuning of the Mercedes CLE is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +83 hp with no hardware changes.
Can you do Stage 1 on the Mercedes CLE 200 (2.0T) MHEV 197 hp?
Yes, Stage 1 for the Mercedes CLE 200 (2.0T) MHEV 197 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Mercedes CLE?
Stage 2 on the Mercedes CLE 200 (2.0T) MHEV 197 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Mercedes CLE 200 (2.0T) MHEV 197 hp?
The Mercedes CLE 200 (2.0T) MHEV 197 hp was fitted with different ECUs depending on the year and trim: Bosch MED17.7.7, Bosch VGS3-NAG3. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Mercedes CLE warranty after chip tuning?
The factory warranty of the Mercedes CLE does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Mercedes CLE take?
On the Mercedes CLE 200 (2.0T) MHEV 197 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Mercedes CLE?
Yes, the original ECU firmware of the Mercedes CLE 200 (2.0T) MHEV 197 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Mercedes CLE?
Stage 1 for the Mercedes CLE 200 (2.0T) MHEV 197 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.