Mercedes CLA 220 CDI (2.1) 163 hp — Stage 1 file (+37 hp)
hp
Stage 1 file for Mercedes CLA 220 CDI (2.1) 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes CLA 220 CDI (2.1) 163 hp ECU
Mercedes CLA (2013 - C117) 220 CDI (2.1) 163 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 163 to 200 hp (+37 hp, +23%) and torque from 350 to 420 Nm (+70 Nm). This engine ships with different ECU variants: Delphi CRD.11, Delphi CRD3.10, Delphi CRD3.1R, Delphi CRD3.40, Delphi CRD3.50, Delphi CRD3.60, Bosch VGS2-FDCT gen1, Bosch VGS2-FDCT gen2, Siemens/Continental VGSx-NAG2, Delphi CRD3. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 10 configurations · 10 ECU variants. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. 4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. Mid-range Mercedes diesels are a mainstream chip tuning subject in both the commercial and passenger-car segments. The factory calibration on Mercedes diesels is conservative, leaving headroom for Stage 1 while preserving engine life. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels.
Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. Mid-range Mercedes engines are a premium segment with a conservative factory calibration, and Stage 1 preserves engine life. Mercedes prioritises smooth running, and Stage 1 preserves the engine's character. The Mercedes factory calibration allows a confident move to Stage 1 without hardware changes. The Mercedes community is active in Europe, with a large pool of available Stage files.
Frequently asked questions
How many horsepower does the Mercedes CLA 220 CDI (2.1) 163 hp reach after a remap?
After Stage 1 the power of the Mercedes CLA 220 CDI (2.1) 163 hp rises from 163 to 200 hp, a gain of 37 hp (+23%). Torque rises from 350 to 420 Nm (+70 Nm).
How does Stage 1 differ from stock on the Mercedes CLA?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes CLA with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +37 hp with no hardware changes.
What is the risk of Stage 1 on the Mercedes CLA 220 CDI (2.1) 163 hp?
A remap of the Mercedes CLA 220 CDI (2.1) 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mercedes CLA 220 CDI (2.1) 163 hp?
Stage 2 on the Mercedes CLA 220 CDI (2.1) 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Mercedes CLA 220 CDI (2.1) 163 hp built with?
The Mercedes CLA 220 CDI (2.1) 163 hp comes with 10 ECU variants: Delphi CRD.11, Delphi CRD3.10, Delphi CRD3.1R, Delphi CRD3.40, Delphi CRD3.50, Delphi CRD3.60, Bosch VGS2-FDCT gen1, Bosch VGS2-FDCT gen2, Siemens/Continental VGSx-NAG2, Delphi CRD3. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Mercedes CLA remain valid after Stage 1?
After remapping the Mercedes CLA, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes CLA?
Reading and writing via OBD takes 25-30 minutes on the Mercedes CLA. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes CLA?
Before Stage 1 the original of the Mercedes CLA 220 CDI (2.1) 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes CLA 220 CDI (2.1) 163 hp cost?
The remap price for the Mercedes CLA 220 CDI (2.1) 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.