Mercedes CL 63 AMG Perf. (5.5T) 563 hp — Stage 1 file
hp
Stage 1 file for Mercedes CL 63 AMG Perf. (5.5T) 563 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes CL 63 AMG Perf. (5.5T) 563 hp ECU
Mercedes CL (2010 - W216) 63 AMG Perf. (5.5T) 563 hp — premium petrol engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.
4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mid-generation petrol models use standard OBD flash. The AMG 'one engineer, one engine' principle means each engine is built by a single craftsman whose signature appears on the plaque. Maybach uses Mercedes engines for the ultra-luxury segment, with the emphasis on quietness and smoothness.
The AMG community is active in Germany, but the protection is the toughest in the industry, so Stage 1 on AMG usually requires Bench. The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. Top AMG engines sit at the Mercedes power ceiling, and the gain is significant. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects.
Frequently asked questions
How much horsepower does Stage 1 add for the Mercedes CL 63 AMG Perf. (5.5T) 563 hp?
Stage 1 for the Mercedes CL 63 AMG Perf. (5.5T) 563 hp adds +0 hp — power increases from 563 to 563 hp (+0%). Torque rises from 900 to 900 Nm (+0 Nm).
What does a Stage 1 remap of the Mercedes CL 63 AMG Perf. (5.5T) 563 hp include?
Stage 1 on the Mercedes CL 63 AMG Perf. (5.5T) 563 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +0 hp with no hardware changes.
What does Stage 1 give on the top-spec Mercedes CL 63 AMG Perf. (5.5T) 563 hp?
On the top-spec Mercedes CL 63 AMG Perf. (5.5T) 563 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the Mercedes CL 63 AMG Perf. (5.5T) 563 hp?
Stage 2 for the Mercedes CL 63 AMG Perf. (5.5T) 563 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Mercedes CL?
Stage 1 on the Mercedes CL voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mercedes CL 63 AMG Perf. (5.5T) 563 hp done?
The full remap cycle for the Mercedes CL — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mercedes CL?
The original Mercedes CL ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mercedes CL 63 AMG Perf. (5.5T) 563 hp?
The cost of Stage 1 for the Mercedes CL 63 AMG Perf. (5.5T) 563 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.