Mercedes B 200 CDI (2.0) 140 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Mercedes B 200 CDI (2.0) 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes B 200 CDI (2.0) 140 hp ECU
Mercedes B (2005 - W245) 200 CDI (2.0) 140 hp — premium diesel engine of the passenger segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 140 to 170 hp (+30 hp, +21%) and torque from 300 to 360 Nm (+60 Nm). ECU — Bosch EDC16C32. Flashing method: OBD or Bench depending on the unit's protection. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels. On older Mercedes diesels, Stage 1 is flashed over OBD with no complications. Mercedes diesels are known for smooth, quiet running, a hallmark of the premium segment.
The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. Stage 1 on mid-range Mercedes diesels delivers a noticeable torque gain. The Mercedes factory calibration allows a confident move to Stage 1 without hardware changes. The Mercedes community is active in Europe, with a large pool of available Stage files. Mid-range Mercedes engines are a premium segment with a conservative factory calibration, and Stage 1 preserves engine life. Mercedes prioritises smooth running, and Stage 1 preserves the engine's character.
Frequently asked questions
How much does the power of the Mercedes B 200 CDI (2.0) 140 hp increase after Stage 1?
The Stage 1 gain for the Mercedes B 200 CDI (2.0) 140 hp is 30 hp (+21%) over the stock 140 hp, for a total of 170 hp. Torque rises from 300 to 360 Nm (+60 Nm).
What is Stage 1 chip tuning for the Mercedes B?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes B with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.
What is the risk of Stage 1 on the Mercedes B 200 CDI (2.0) 140 hp?
A remap of the Mercedes B 200 CDI (2.0) 140 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Mercedes B 200 CDI (2.0) 140 hp?
Stage 2 on the Mercedes B 200 CDI (2.0) 140 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Mercedes B 200 CDI (2.0) 140 hp use?
The Mercedes B 200 CDI (2.0) 140 hp is fitted with the Bosch EDC16C32 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Mercedes B remain valid after Stage 1?
After remapping the Mercedes B, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes B?
Reading and writing via OBD takes 25-30 minutes on the Mercedes B. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes B?
Before Stage 1 the original of the Mercedes B 200 CDI (2.0) 140 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes B 200 CDI (2.0) 140 hp cost?
The remap price for the Mercedes B 200 CDI (2.0) 140 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.