Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm — Stage 1 file (+50 hp)
hp
Stage 1 file for Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm ECU
Mercedes Arocs (I (2013+)) OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm — premium diesel engine of the commercial segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 299 to 349 hp (+50 hp, +17%) and torque from 1200 to 1490 Nm (+290 Nm). The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. 4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. High-output Mercedes diesels are premium-class with an emphasis on torque, and Stage 1 is especially felt in Nm. The factory calibration on Mercedes diesels is conservative, leaving headroom for Stage 1 while preserving engine life. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels.
The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. On Mercedes up to the recent generation, Stage 1 OBD flash is available. High-output Mercedes engines are premium-class with solid headroom for Stage 1. On modern high-output Mercedes, Bench reading is often required because of the encryption. The Mercedes premium segment is a high-output platform with Stage 2 potential.
Frequently asked questions
How many horsepower does the Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm reach after a remap?
The Stage 1 gain for the Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm is 50 hp (+17%) over the stock 299 hp, for a total of 349 hp. Torque rises from 1200 to 1490 Nm (+290 Nm).
What is Stage 1 chip tuning for the Mercedes Arocs?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Arocs with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Mercedes Arocs?
The high-output Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm?
Stage 2 on the Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Mercedes Arocs remain valid after Stage 1?
After remapping the Mercedes Arocs, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Arocs?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Arocs. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Arocs?
Before Stage 1 the original of the Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm cost?
The remap price for the Mercedes Arocs OM936 SCR 7.7 (EU6) 299hp (220kW) 1200Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.