Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm — Stage 1 file (+70 hp)
hp
Stage 1 file for Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm ECU
Mercedes Arocs (I (2013+)) OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm — premium diesel engine of the commercial segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 360 to 430 hp (+70 hp, +19%) and torque from 1800 to 2160 Nm (+360 Nm). A diesel built in 2013 — the Tricore ECU era; OBD flash works on most production revisions.
4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. The factory calibration on Mercedes diesels is conservative, leaving headroom for Stage 1 while preserving engine life. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels. Mid-generation diesel models use standard OBD read/write.
On Mercedes up to the recent generation, Stage 1 OBD flash is available. Top AMG engines sit at the Mercedes power ceiling, and the gain is significant. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects.
Frequently asked questions
How much horsepower does Stage 1 add for the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm?
Stage 1 chip tuning on the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm boosts engine output by 70 hp: from 360 to 430 hp. Torque rises from 1800 to 2160 Nm (+360 Nm).
What changes in the Mercedes Arocs ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Arocs with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +70 hp with no hardware changes.
Does Stage 1 make sense on the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm with this much power?
On the top-spec Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm?
Stage 2 for the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Mercedes Arocs remain valid after Stage 1?
After remapping the Mercedes Arocs, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Arocs?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Arocs. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Arocs?
Before Stage 1 the original of the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm cost?
The remap price for the Mercedes Arocs OM470 SCR 10.7 (EU6) 360hp (265kW) 1800Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.