Mercedes Actros 570 571hp (420kW) 2700Nm — Stage 1 file (+83 hp)
hp
Stage 1 file for Mercedes Actros 570 571hp (420kW) 2700Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Actros 570 571hp (420kW) 2700Nm ECU
Mercedes Actros (I (1995+)) 570 571hp (420kW) 2700Nm — premium diesel engine of the commercial segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 571 to 654 hp (+83 hp, +15%) and torque from 2700 to 3105 Nm (+405 Nm). The 1995 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. AMG is the performance division of Mercedes (since 1967), building engines on the 'one man, one engine' principle in Affalterbach. Mercedes is one of the most protected brands in the chip tuning industry in terms of encryption. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels. On older Mercedes diesels, Stage 1 is flashed over OBD with no complications. Mercedes diesels are known for smooth, quiet running, a hallmark of the premium segment.
The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. In the Mercedes commercial segment, Stage 1 focuses on torque. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models. AMG Performance Studio is Mercedes's in-house tuning studio for bespoke projects. Bench reading is a mandatory procedure for modern AMG models.
Frequently asked questions
How much does the power of the Mercedes Actros 570 571hp (420kW) 2700Nm increase after Stage 1?
After Stage 1 the power of the Mercedes Actros 570 571hp (420kW) 2700Nm rises from 571 to 654 hp, a gain of 83 hp (+15%). Torque rises from 2700 to 3105 Nm (+405 Nm).
How does Stage 1 differ from stock on the Mercedes Actros?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Actros with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +83 hp with no hardware changes.
Does Stage 1 make sense on the Mercedes Actros 570 571hp (420kW) 2700Nm with this much power?
Stage 1 for the Mercedes Actros 570 571hp (420kW) 2700Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Mercedes Actros 570 571hp (420kW) 2700Nm?
Stage 2 on the Mercedes Actros 570 571hp (420kW) 2700Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Mercedes Actros remain valid after Stage 1?
After remapping the Mercedes Actros, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Actros?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Actros. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Actros?
Before Stage 1 the original of the Mercedes Actros 570 571hp (420kW) 2700Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Actros 570 571hp (420kW) 2700Nm cost?
The remap price for the Mercedes Actros 570 571hp (420kW) 2700Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.