Mercedes Actros 540 537hp (395kW) 2500Nm — Stage 1 file (+83 hp)
hp
Stage 1 file for Mercedes Actros 540 537hp (395kW) 2500Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Mercedes Actros 540 537hp (395kW) 2500Nm ECU
Mercedes Actros (I (1995+)) 540 537hp (395kW) 2500Nm — premium diesel engine of the commercial segment of the Mercedes-Benz Group AG (Mercedes-Benz, AMG, Maybach, Smart, EQ) group (Германия, 1926). Stage 1 chip tuning raises power from 537 to 620 hp (+83 hp, +15%) and torque from 2500 to 2875 Nm (+375 Nm). The 1995 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Mercedes three-pointed star symbolises dominance on land, at sea and in the air. 4MATIC all-wheel drive is Mercedes' signature system, fitted to most models. The Mercedes-Benz Group AG (Daimler AG until 2022) comprises Mercedes-Benz, AMG, Maybach, Smart and the EQ line. Top Mercedes diesels sit at the power ceiling of the diesel segment, and Stage 2 requires hardware. The factory calibration on Mercedes diesels is conservative, leaving headroom for Stage 1 while preserving engine life. DPF/SCR with AdBlue is standard on all Euro-6 Mercedes diesels.
The Mercedes community in Europe has a large pool of available Stage files for the standard models. Stage 1 on Mercedes often requires refreshing the adaptations after the flash. In the Mercedes commercial segment, Stage 1 focuses on torque. Bench reading is a mandatory procedure for modern AMG models. Top AMG engines sit at the Mercedes power ceiling, and the gain is significant. AMG engines are a well-known base once hardware is added (downpipe + intake + intercooler). Brabus is a premium alternative to AMG for the top models.
Frequently asked questions
How many horsepower does the Mercedes Actros 540 537hp (395kW) 2500Nm reach after a remap?
The Stage 1 gain for the Mercedes Actros 540 537hp (395kW) 2500Nm is 83 hp (+15%) over the stock 537 hp, for a total of 620 hp. Torque rises from 2500 to 2875 Nm (+375 Nm).
What is Stage 1 chip tuning for the Mercedes Actros?
Stage 1 is a software optimization of the factory ECU firmware of the Mercedes Actros with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +83 hp with no hardware changes.
Does Stage 1 make sense on the Mercedes Actros 540 537hp (395kW) 2500Nm with this much power?
Stage 1 for the Mercedes Actros 540 537hp (395kW) 2500Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Mercedes Actros 540 537hp (395kW) 2500Nm?
Stage 2 on the Mercedes Actros 540 537hp (395kW) 2500Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Mercedes Actros remain valid after Stage 1?
After remapping the Mercedes Actros, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Mercedes Actros?
Reading and writing via OBD takes 25-30 minutes on the Mercedes Actros. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Mercedes Actros?
Before Stage 1 the original of the Mercedes Actros 540 537hp (395kW) 2500Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Mercedes Actros 540 537hp (395kW) 2500Nm cost?
The remap price for the Mercedes Actros 540 537hp (395kW) 2500Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.