McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp — Stage 1 file (+110 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp ECU

McLaren 570S / Sprint / GT / GT4 (2015) 3.8 T (2015) 570 hp — luxury petrol engine of the passenger segment of the McLaren Automotive group (Великобритания, 1985). Stage 1 chip tuning raises power from 570 to 680 hp (+110 hp, +19%) and torque from 600 to 720 Nm (+120 Nm). ECU — Bosch ME17.8.32. Flashing method: OBD or Bench depending on the unit's protection. A petrol engine built in 2015 — a Tricore platform without strong protection; OBD access works.

McLaren specialises in track-focused supercars. McLaren uses its own M838T/M840T V8 BiTurbo engines. McLaren grew out of the McLaren Racing F1 team. The McLaren Speedtail is a hybrid combining its own V8 with an electric motor. Top-tier McLaren models have significant potential with a track calibration. McLaren's petrol range uses its signature V8 BiTurbo engines.

With the right hardware, McLaren comfortably reaches Stage 2. The McLaren community is an ultra-premium track segment and a narrow niche. Top-tier McLaren engines sit at the power ceiling of the British track segment.

Frequently asked questions

How much does the power of the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp increase after Stage 1?

Stage 1 for the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp adds +110 hp — power increases from 570 to 680 hp (+19%). Torque rises from 600 to 720 Nm (+120 Nm).

What does a Stage 1 remap of the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp include?

Stage 1 is a software optimization of the factory ECU firmware of the McLaren 570S / Sprint / GT / GT4 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +110 hp with no hardware changes.

Does Stage 1 make sense on the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp with this much power?

On the top-spec McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.

What is Stage 2 for the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp?

Stage 2 for the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

What ECU platform does the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp use?

The McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp is fitted with the Bosch ME17.8.32 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.

Does the factory warranty of the McLaren 570S / Sprint / GT / GT4 remain valid after Stage 1?

After remapping the McLaren 570S / Sprint / GT / GT4, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the McLaren 570S / Sprint / GT / GT4?

Reading and writing via OBD takes 25-30 minutes on the McLaren 570S / Sprint / GT / GT4. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the McLaren 570S / Sprint / GT / GT4?

Before Stage 1 the original of the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp cost?

The remap price for the McLaren 570S / Sprint / GT / GT4 3.8 T (2015) 570 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno