McCormick XTX 215M 204hp (150kW) 800Nm — Stage 1 file (+48 hp)
hp
Stage 1 file for McCormick XTX 215M 204hp (150kW) 800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for McCormick XTX 215M 204hp (150kW) 800Nm ECU
McCormick XTX (I) 215M 204hp (150kW) 800Nm — agricultural diesel engine of the agricultural segment of the Argo Tractors group (Италия / США, 2000). Stage 1 chip tuning raises power from 204 to 252 hp (+48 hp, +24%) and torque from 800 to 956 Nm (+156 Nm).
McCormick specialises in compact and mid-size tractors. McCormick is a tractor manufacturer, founded in 2000 on the heritage of Case IH. McCormick is part of Argo Tractors. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Высокомощные McCormick — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the McCormick XTX 215M 204hp (150kW) 800Nm?
Stage 1 chip tuning on the McCormick XTX 215M 204hp (150kW) 800Nm boosts engine output by 48 hp: from 204 to 252 hp. Torque rises from 800 to 956 Nm (+156 Nm).
What changes in the McCormick XTX ECU after Stage 1?
Stage 1 on the McCormick XTX 215M 204hp (150kW) 800Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +48 hp with no hardware changes.
What does Stage 1 give on the powerful McCormick XTX 215M 204hp (150kW) 800Nm?
Stage 1 on the powerful McCormick XTX 215M 204hp (150kW) 800Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the McCormick XTX 215M 204hp (150kW) 800Nm?
Stage 2 for the McCormick XTX 215M 204hp (150kW) 800Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the McCormick XTX?
Stage 1 on the McCormick XTX voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the McCormick XTX 215M 204hp (150kW) 800Nm done?
The full remap cycle for the McCormick XTX — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the McCormick XTX?
The original McCormick XTX ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the McCormick XTX 215M 204hp (150kW) 800Nm?
The cost of Stage 1 for the McCormick XTX 215M 204hp (150kW) 800Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.