McCormick XTX 200E 213hp (157kW) 800Nm — Stage 1 file (+47 hp)
hp
Stage 1 file for McCormick XTX 200E 213hp (157kW) 800Nm
Target +0 hp. Custom development for your engine.
Chip tuning for McCormick XTX 200E 213hp (157kW) 800Nm ECU
McCormick XTX (I) 200E 213hp (157kW) 800Nm — agricultural diesel engine of the agricultural segment of the Argo Tractors group (Италия / США, 2000). Stage 1 chip tuning raises power from 213 to 260 hp (+47 hp, +22%) and torque from 800 to 956 Nm (+156 Nm).
McCormick is a tractor manufacturer, founded in 2000 on the heritage of Case IH. McCormick is part of Argo Tractors. McCormick specialises in compact and mid-size tractors. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1.
Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные McCormick — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
What is the Stage 1 effect on the McCormick XTX 200E 213hp (157kW) 800Nm?
Stage 1 chip tuning on the McCormick XTX 200E 213hp (157kW) 800Nm boosts engine output by 47 hp: from 213 to 260 hp. Torque rises from 800 to 956 Nm (+156 Nm).
What changes in the McCormick XTX ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the McCormick XTX with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +47 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the McCormick XTX?
Stage 1 on the powerful McCormick XTX 200E 213hp (157kW) 800Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the McCormick XTX 200E 213hp (157kW) 800Nm?
Stage 2 for the McCormick XTX 200E 213hp (157kW) 800Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the McCormick XTX remain valid after Stage 1?
After remapping the McCormick XTX, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the McCormick XTX?
Reading and writing via OBD takes 25-30 minutes on the McCormick XTX. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the McCormick XTX?
Before Stage 1 the original of the McCormick XTX 200E 213hp (157kW) 800Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the McCormick XTX 200E 213hp (157kW) 800Nm cost?
The remap price for the McCormick XTX 200E 213hp (157kW) 800Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.