McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm — Stage 1 file (+38 hp)
hp
Stage 1 file for McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm
Target +0 hp. Custom development for your engine.
Chip tuning for McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm ECU
McCormick MTX (I) 150 6.7 R6 152hp (112kW) 582Nm — agricultural diesel engine of the agricultural segment of the Argo Tractors group (Италия / США, 2000). Stage 1 chip tuning raises power from 152 to 190 hp (+38 hp, +25%) and torque from 582 to 725 Nm (+143 Nm).
McCormick is a tractor manufacturer, founded in 2000 on the heritage of Case IH. McCormick is part of Argo Tractors. McCormick specialises in compact and mid-size tractors. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. McCormick среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm?
After Stage 1 the power of the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm rises from 152 to 190 hp, a gain of 38 hp (+25%). Torque rises from 582 to 725 Nm (+143 Nm).
How does Stage 1 differ from stock on the McCormick MTX?
Stage 1 is a software optimization of the factory ECU firmware of the McCormick MTX with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +38 hp with no hardware changes.
What is the risk of Stage 1 on the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm?
A remap of the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm?
Stage 2 on the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the McCormick MTX remain valid after Stage 1?
After remapping the McCormick MTX, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the McCormick MTX?
Reading and writing via OBD takes 25-30 minutes on the McCormick MTX. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the McCormick MTX?
Before Stage 1 the original of the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm cost?
The remap price for the McCormick MTX 150 6.7 R6 152hp (112kW) 582Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.