McCormick MC 95 4.4 R4 90hp (66kW) 387Nm — Stage 1 file (+22 hp)
hp
Stage 1 file for McCormick MC 95 4.4 R4 90hp (66kW) 387Nm
Target +0 hp. Custom development for your engine.
Chip tuning for McCormick MC 95 4.4 R4 90hp (66kW) 387Nm ECU
McCormick MC (I) 95 4.4 R4 90hp (66kW) 387Nm — agricultural petrol engine of the agricultural segment of the Argo Tractors group (Италия / США, 2000). Stage 1 chip tuning raises power from 90 to 112 hp (+22 hp, +24%) and torque from 387 to 463 Nm (+76 Nm).
McCormick specialises in compact and mid-size tractors. McCormick is a tractor manufacturer, founded in 2000 on the heritage of Case IH. McCormick is part of Argo Tractors. McCormick runs mostly diesel engines for the agricultural segment.
Сельхозсегмент — расход и тяга важнее л.с. Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Маломощные McCormick — компактная техника; Stage 1 безопасный.
Frequently asked questions
How much does the power of the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm increase after Stage 1?
The Stage 1 gain for the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm is 22 hp (+24%) over the stock 90 hp, for a total of 112 hp. Torque rises from 387 to 463 Nm (+76 Nm).
What is Stage 1 chip tuning for the McCormick MC?
Stage 1 on the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +22 hp with no hardware changes.
Is Stage 1 safe for the low-output McCormick MC 95 4.4 R4 90hp (66kW) 387Nm?
Stage 1 on the base McCormick MC is safe — the factory calibration of low-output engines leaves headroom for software optimization. The gain is modest, but engine life is not affected.
How does Stage 2 differ from Stage 1 on the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm?
Stage 2 on the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the McCormick MC?
Stage 1 on the McCormick MC voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm done?
The full remap cycle for the McCormick MC — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the McCormick MC?
The original McCormick MC ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm?
The cost of Stage 1 for the McCormick MC 95 4.4 R4 90hp (66kW) 387Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.