Mazda MX5 2.0 Skyactiv-G 160 hp — Stage 1 file (+15 hp)
hp
Stage 1 file for Mazda MX5 2.0 Skyactiv-G 160 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda MX5 2.0 Skyactiv-G 160 hp ECU
Mazda MX5 (2016) 2.0 Skyactiv-G 160 hp — mass-market petrol engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 160 to 175 hp (+15 hp, +9%) and torque from 200 to 220 Nm (+20 Nm). The 2016 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
SkyActiv is Mazda's signature engine philosophy built around a high compression ratio. Mazda specialises in family saloons and compact crossovers. The MX-5 (Miata) has been Mazda's iconic roadster since 1989. Mazda's factory optimisation is close to the limit, leaving only modest headroom for Stage 1. SkyActiv-X is a unique petrol engine that uses compression ignition (HCCI). SkyActiv-G is Mazda's signature naturally aspirated petrol range with a high compression ratio.
The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. On SkyActiv-G, Stage 1 delivers a modest gain. Mazda has a limited chip tuning culture owing to its already optimised factory calibration. Mid-range Mazda — SkyActiv engines with a conservative factory calibration. There is little headroom for Stage 1 without hardware changes.
Frequently asked questions
How many horsepower does the Mazda MX5 2.0 Skyactiv-G 160 hp reach after a remap?
The Stage 1 gain for the Mazda MX5 2.0 Skyactiv-G 160 hp is 15 hp (+9%) over the stock 160 hp, for a total of 175 hp. Torque rises from 200 to 220 Nm (+20 Nm).
What is Stage 1 chip tuning for the Mazda MX5?
Stage 1 on the Mazda MX5 2.0 Skyactiv-G 160 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +15 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 Skyactiv-G 160 hp?
Stage 1 on the Mazda MX5 2.0 Skyactiv-G 160 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mazda MX5 2.0 Skyactiv-G 160 hp?
Stage 2 on the Mazda MX5 2.0 Skyactiv-G 160 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Mazda MX5?
Stage 1 on the Mazda MX5 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mazda MX5 2.0 Skyactiv-G 160 hp done?
The full remap cycle for the Mazda MX5 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mazda MX5?
The original Mazda MX5 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mazda MX5 2.0 Skyactiv-G 160 hp?
The cost of Stage 1 for the Mazda MX5 2.0 Skyactiv-G 160 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.