Mazda MX5 1.5 Skyactiv-G 131 hp — Stage 1 file (+10 hp)
hp
Stage 1 file for Mazda MX5 1.5 Skyactiv-G 131 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Mazda MX5 1.5 Skyactiv-G 131 hp ECU
Mazda MX5 (2016) 1.5 Skyactiv-G 131 hp — mass-market petrol engine of the passenger segment of the Mazda Motor Corporation (независимый) group (Япония, 1920). Stage 1 chip tuning raises power from 131 to 141 hp (+10 hp, +8%) and torque from 150 to 158 Nm (+8 Nm). A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
The RX (Wankel) is Mazda's historic rotary engine series. Mazda is a Japanese carmaker, founded in 1920 in Hiroshima. Mazda is an independent brand (historically with a technical partnership with Ford). On mid-range Mazda petrol engines, Stage 1 delivers a modest gain (5-12%). Mazda's factory optimisation is close to the limit, leaving only modest headroom for Stage 1. SkyActiv-X is a unique petrol engine that uses compression ignition (HCCI).
The SkyActiv technology is already close to its factory limit, leaving little headroom for Stage 1 without hardware changes. On SkyActiv-G, Stage 1 delivers a modest gain. Mazda has a limited chip tuning culture owing to its already optimised factory calibration. There is little headroom for Stage 1 without hardware changes. Mid-range Mazda — SkyActiv engines with a conservative factory calibration.
Frequently asked questions
How much horsepower does Stage 1 add for the Mazda MX5 1.5 Skyactiv-G 131 hp?
Stage 1 for the Mazda MX5 1.5 Skyactiv-G 131 hp adds +10 hp — power increases from 131 to 141 hp (+8%). Torque rises from 150 to 158 Nm (+8 Nm).
What does a Stage 1 remap of the Mazda MX5 1.5 Skyactiv-G 131 hp include?
Stage 1 on the Mazda MX5 1.5 Skyactiv-G 131 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +10 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 Skyactiv-G 131 hp?
Stage 1 on the Mazda MX5 1.5 Skyactiv-G 131 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Mazda MX5 1.5 Skyactiv-G 131 hp?
Stage 2 for the Mazda MX5 1.5 Skyactiv-G 131 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Mazda MX5?
Stage 1 on the Mazda MX5 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Mazda MX5 1.5 Skyactiv-G 131 hp done?
The full remap cycle for the Mazda MX5 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Mazda MX5?
The original Mazda MX5 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Mazda MX5 1.5 Skyactiv-G 131 hp?
The cost of Stage 1 for the Mazda MX5 1.5 Skyactiv-G 131 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.